全部

1·The bleed area will fall outside this bleed line.

出血区域将超出这条出血行。

2·Connect the air line for the bleed load control to the fitting in the upper shroud.

将引气负载控制的空气管道连接到上保护罩的接头上。

3·The non-bleed controller uses air only when exhausting the line to the controlled device .

无放流式调节器只有在通至调节机构的管道排气时才消耗空气。

4·The non-bleed controller uses air only when exhausting the line to the controlled device.

无放流式调节器只有在通至调节机构的管道排气时才消耗空气。

5·When the solenoid is de-energised, the pilot orifice closes and full line pressure is applied to the top of the diaphragm through a bleed orifice.

当螺线管德通电，飞行员口关闭并全线压力作用于出血口通过对膜片的顶部。

6·When making adjustment in the reduced pressure, always bleed the line to allow the line pressure to adjust to the regular setting.

在减少的压力上进行调节时，要始终对管道进行排放，使得管线压力调节到常规的设置点。