全部

1·Now this is a series circuit and this is a parallel.

这是串联的电路，这个是并联的。

2·In the series circuit, the electric current can take only one path.

在串联电路中，电流只有一条流动途径，没有分支。

3·More bulbs in the series circuit will decrease their brightness. A smaller current will flow.

在串联电路中增加灯泡会降低它们的亮度，而电路中的电流也会减小。

4·Analysis shows that the traditional RLC series circuit model is incomplete when capacitive switch has multiple support beams.

分析表明，当开关的上电极为多支撑梁结构时，需要对传统的开关等效电路加以改进。

5·During the measuring of the DC resistance of a transformer's winding, the winding is equivalent to a resistance-inductance series circuit.

在进行变压器绕组直流电阻的测量时，变压器绕组可以等效为一个由电阻、电感组成的串联电路。

6·This paper discussed the LC series circuit, then proposed method to select the reactor reactance rate to support the use of the capacitor.

本文在讨论了LC串联电路之后，提出了与电容器配套使用的电抗器电抗率的选取方法。

7·Analysis of numerical methods with rc, RL series circuit transient process and numerical methods in analysis of other complex circuit application examples.

用数值计算方法分析RC、RL串联电路暂态过程及数值计算方法在其他复杂电路分析中的应用举例。

8·In order to decrease the rate of fault and reduce the cost, this paper researches and improves the reliability of operation mechanism of CW1 series circuit breaker.

本论文的目的是研究并提高CW1系列智能型万能式断路器操作机构的可靠性，可以减小故障的发生率，从而减少用户的损失。

9·The RC series circuit (linear time - invariant circuit)excited by the non - sine periodic voltage is analysed, both the transient response and the steady - state response of this circuit are obtained.

分析了非正弦周期电压作用下的RC串联电路（线性、非时变电路），得到了暂态响应分量和稳态响应分量。

10·On the basis of discussing the reliability theory by total distributed control systems, it puts forward the reliability design of series hardware circuit.

在简要论述集散型控制系统可靠性理论的基础上，提出放大器硬件电路的可靠性设计。