全部

1·It also has an end cover port.

它也是一个盖端口。

2·Wet mill end cover is installed on the exhaust valve.

湿磨机端盖上安装放气阀。

3·Moreover, the obturating ring can reliably seal the cylinder and the end cover.

且密封圈能将筒体和端盖可靠的密封。

4·If the end cover port is used as the inlet port, the internal drag is reduced.

如果盖端口使用作为入口端，内部障碍被减少。

5·Remove motor shaft end cover. Apply hand winding crank to the squared end of motor shaft.

拆去电机轴尾盖，将盘车手轮放在电机轴尾。

6·This design elaborated the manufacture the axis seals the end cover compound mold design.

本设计阐述了制造“轴封端盖”的复合模的设计。

7·It will be tightly fixed on the end cover which can prevent seals from rotating while shaft rotating.

其密封件固有的安装裙被压紧在端盖上，可防止密封件随着轴的转动而转动。

8·The end cover switch is loosened, a circuit is cut off, and the electric flash device stops flashing.

旋松端盖开关，电路断开，电闪光装置停止发光。

9·The welding characteristics on the double end cover of deoscillator stock tank are analyzed all-sidedly.

全面分析了减震器储油缸两端端盖的焊接特点。

10·End cover structure of the APS and 400 spring series is suitable for most of the rotation and swing seal.

端盖式结构的APS和400弹簧系列适用于大部分的旋转和摆动密封。

端盖

1·The invention discloses a different-pressure automatic shuttle valve, comprising valve body, through end cover, valve core ball, spring seat, spring, inlet end, outlet port .

本发明公开了一种压差式自动关闭阀，该阀包括阀体、通端盖、阀芯球、弹簧座、弹簧、进口端、出口端；

2·This design elaborated the manufacture the axis seals the end cover compound mold design.

本设计阐述了制造“轴封端盖”的复合模的设计。

3·The device is mainly made up of inner tube, outer tube, piston tube, end cover, retaining ring, hanger, liquid-route element and sealing element.

该装置主体由内管、外管、活塞管、端盖、承压环、吊耳、液路元件和密封元件等组成。

4·It will be tightly fixed on the end cover which can prevent seals from rotating while shaft rotating.

其密封件固有的安装裙被压紧在端盖上，可防止密封件随着轴的转动而转动。

5·End cover structure of the APS and 400 spring series is suitable for most of the rotation and swing seal.

端盖式结构的APS和400弹簧系列适用于大部分的旋转和摆动密封。