全部

1·The mold core processing all is generally the piecework .

模具型芯的加工一般都是单件生产。

2·And the convex mold core (1) is connected with the convex mold.

且通过凸模型芯(1)和凸模连接。

3·Mold Core inlay pieces should be of sufficient strength to prevent deformation, damage and displacement.

模具型芯嵌件应有足够强度、防止变形、位移与损坏。

4·3 get the core length, core assembly size is determined according to the structure size of the mold core seat;

得到模芯的长度后，根据模芯座的结构尺寸确定模芯装配尺寸；

5·The products or the mold core need optical mirror, CD pattern, wood grain, diamond pattern, drawing lines, diamond-shaped pattern surface;

对表面需求光学镜面、CD纹、木纹、钻石纹、拉丝纹、菱形纹之产品或模芯；

6·The improved design is increased in the fixed mold core, which change first parting into second parting and demould the inverted cone mandatorily.

该改进设计主要是在定模部分增加型芯，并将一次分型改成二次分型，再使倒锥部分实现强制脱模。

7·The small formation holes in the brush cover was constructed with the mold core in moving and static container, and center ingate was employed to the gating system.

针对电刷端盖压铸件结构及工艺要求，选择端盖口部大端面为动静模分型面，铸件上各成形小孔由动静模型芯对接组成，浇注系统采用中心浇道。

8·An ejector rod and a female die are fixed at the lower part of the upper beam, and a mold core is mounted on the lower beam. The end of the mold core has at least one shoulder.

于上架梁的下方固定有顶杆和凹模，于下架梁上安装有其一端部至少有一个肩凸的型芯。

9·Core print is the region added to the pattern, core, or mold that is used to locate and support the core within the mold.

砂芯座是加在型模、砂芯或铸模上的特定区域，用来在铸模内部定位和支撑砂芯。

10·It only can separate mold from core frequently, and then conduct the assembly; positioning error is increased.

往往只能型芯分开成型，再进行组装，定位误差增加。