全部

1·Kerosene is rarely stored in inner floating roof tank in general condition.

通常情况下，很少用内浮顶罐储存煤油。

2·The analysis on the design regulation of dome roof tank and its stress conditions is made.

分别从拱顶油罐的设计规定和受力状况两方面进行了分析。

3·The weld defects and thermal stress result in failure of vapour wax-removal loop-pipe used in floating roof tank.

浮顶罐蒸汽除蜡装置失效的原因是施工焊接缺陷和热应力破坏。

4·The tank top to tank shell of dome roof tank is a thin-connection structure and is easy to crack during vapor purging.

由于拱顶油罐的罐顶与罐壁设计为弱连接，在蒸汽吹扫作业中，易发生罐顶爆裂事故。

5·Measurement errors of inner floating roof tank are commonly concerned problem to operators engaging in oil measurement.

内浮顶油罐计量误差是从事油品计量作业人员所关注的问题。

6·The storage tank was tilted and oil product was leaked due to asymmetry submergence of the foundation of floating roof tank.

由于浮顶罐基础不均匀下沉，致使罐体倾斜，并导致油品泄漏。

7·Using inner floating roof tank to store light oil can decrease the evaporation loss and prevent the environment from polluting.

选用内浮顶油罐储存轻质油品是降低油品蒸发损耗和减少环境污染的有效措施。

8·The installation of expansion oil pipe of inner floating roof tank oil piping is different with that of dome roof tank oil piping.

内浮顶油罐输油管路胀油管的安装不同于拱顶罐胀油管的安装。

9·This paper analyzes the metering error of floating roof tank caused by the floating tray to guide the installation of liquidometer.

对浮盘所造成的浮顶罐计量误差进行了分析，用以指导液位仪安装。

10·This article introduces a new type of dip hatch for inner floating roof tank, which can avoid the problem of inconvenient handle in current dip hatch.

介绍一种新的内浮顶油罐计量口，它克服了现行计量口操作不便的缺点。