全部

1·A braze metal coating (56) is attached to a surface the carbide substrate (54).

钎缝金属涂层(56)被附接到碳化物基底(54)的表面。

2·Can be used as base metal coating materials used vinyl resin system by plastisol or solution, polyester or acrylic, etc.

可以作为金属涂布的底基材料使用的树脂系统有乙烯、聚酯或丙烯酸等。

3·The salt solution is to point to in the cathode can be deposited required of the metal coating the salt, used to provide a metal ions.

主盐是指镀液中能在阴极上沉积出所要求镀层金属的盐﹐用于提供金属离子。

4·In the activation treatment on the surface of substrate, the plating metal ions was catalyzed reduction metal coating process of formation.

在经活化处理的基体表面上，镀液中金属离子被催化还原形成金属镀层的过程。

5·A novel etched optical fiber temperature sensor with metal coating is presented. The working principle of this sensor is analyzed in detail.

介绍了一种新型的金属敷层刻纹光纤温度传感器模型，并对其测温原理进行了研究。

6·The zinc plating could be used as bottom of chemical nickel plating and could deposit other protecting decorating metal coating layer on it.

所得锌镀层可 以作为化学镀镍的底层，也可以在其上沉积其它防护装饰性金属镀层。

7·This has been found to be necessary to compensate for the difference in thermal expansion between the metal coating and the plastics substrate.

人们发现，这对补偿金属镀层和和塑料基体间的热膨胀差很有必要。

8·The variation of concentration of main salt in electrolyte affects the quality of metal coating obviously, and it is for alloy plating coating as well.

在电镀过程中，镀液主盐离子浓度的变化对镀层的影响极大，对合金电镀更是如此。

9·In addition, the flat metal coating will not be scratched with the probe, so that the conducting plate has long service life and good experiment effect.

另外，金属镀膜平整度好，且不会被探针划伤，因此，导电板的使用寿命长，实验效果好。

10·The thickness of the metal coating 11 is preferably substantially smaller, if them are at all present at the flat sides 5, 6, than at the narrow side 8.

只要金属覆层(11)主要存在于扁平面(5、6)上，其厚度就最好明显低于窄面(8)上的覆层厚度。