全部

1·A high-voltage transconductance amplifier.

高压跨导放大器。

2·The described multiplier is based on the variable transconductance principle.

本文叙述一种可变跨导脉冲乘法器。

3·To calculate gain and transconductance, refer to the SENSE pin on fixed voltage parts.

为了计算增益和跨导，指的是部分意义上的固定电压引脚。

4·A pseudo differential operational transconductance amplifier is proposed in this paper.

提出了一种超宽带伪差分运算跨导放大器。

5·The saturation extent of transconductance curves are superior to that of models reported.

跨 导 曲线的饱和程度优于已报导的模型。

6·Ac-coupled technique is used in the transconductance stage to reduce the supply voltage ulteriorly.

跨导级采用了交流耦合互补跨导进一步降低了电源电压。

7·A low voltage fully differential gain-boosted CMOS operational transconductance amplifier is designed.

设计了一种低电压全差动增益增强CMOS运算跨导放大器。

8·This paper describes two CMOS circuit structures of multiple-input operational transconductance amplifier.

提出多输入端运算跨导放大器的两种CMOS电路结构。

9·It is showed that the varying gate voltage will change the nonlinear transconductance to get mixer function.

分析了栅压对改变非线性跨导在混频器中的作用。

10·The MAX15058 utilizes a current-mode control architecture with a high-gain transconductance error amplifier.

该MAX15058采用了具有高增益跨导误差 放大器电流模式控制架构。

跨导

1·To calculate gain and transconductance, refer to the SENSE pin on fixed voltage parts.

为了计算增益和跨导，指的是部分意义上的固定电压引脚。

2·Using this model, the parameters of HEMT such as channel conductance, transconductance, gate capacitance, and cut-off frequency are derived.

由本文模型还推导出了HEMT沟道电导、跨导、栅电容和截止频率等微波参数表达式。

3·This paper presents a new general design method for arbitrary order operational transconductance amplifiers and capacitors (OTA-C) multifunction filters.

提出了一种新的任意阶运算跨导放大器——电容(OTA - C)多功能滤波器的设计方法。

4·On the basis of analyzing the principle of peak-current-mode-controlled boost converter, a novel transconductance error amplifier with high accuracy and high performance is presented.

在分析峰值电流模式升压转换器原理的基础上，设计了一种结构新颖，高精度高性能跨导误差放大器。

5·Using the approach of twice impedance inversion, a floating capacitance multiplier was built by operational transconductance amplifier (OTA).

利用两次回转方法，由运算跨导放大器（简称OTA）构成浮地电容乘法器。

互导

1·This situation can arise, for example, when a transconductance amplifier feeds an output current i0 to a load resistor RL, but the overall circuit is considered to give a voltage gain VL/Vi.

例如当一个互导放大器提供一输出电流i0到负载电阻RL，而全部网络给出电压增益为VL/Vi时，就可出现这种情况。