全部

1·Overflow or underflow in the arithmetic operation.

不能使用那多不好玩儿啊！

2·A floating-point underflow occurred at the RPC server.

RPC服务器上发生浮点下溢。

3·It is reasonable to explain this phenomenon with the underflow erosion.

用潜蚀机制解释这种现象较为合理，它是一个累进变形破坏过程。

4·Its underflow particle size is coarse and particle size composition is even.

但底流粒度较粗，粒度组成均匀。

5·The introduction of the improved EM algorithm also reduces the risk of data underflow .

使用一种改进的EM算法降低了数据下溢的风险。

6·The Fusheng hydropower station adopts the underflow stilling basin to dissipate the energy.

福生水电站采用底流式消力池消能。

7·The stack could underflow if you clean up too much in a function and then attempt to return.

堆栈下溢的，如果你能在一个清洁的功能太多，然后试图返回。

8·Use of composite cyclones and high-frequency vibrating screen for higher recovery of screen underflow;

使用组合旋流器和高频振动筛回收筛下品；

9·During this time the read clock will abruptly speed-up or slow-down to avoid an overflow or underflow condition.

在这段时间里读时钟会突然加速或慢下来，以避免溢流或底流的情况。

10·A high rate thickener which can produce underflow containing 70% solid and its application was described in this article.

本文叙述了一种底流浓度可达70 %以上的高效浓密机及其应用。

下溢

1·MEMWATCH supports ANSI c, provides a log of the results, and detects double-frees, erroneous frees, unfreed memory, overflow and underflow, and so on.

MEMWATCH支持ANSI C，它提供结果日志纪录，能检测双重释放(double - free)、错误释放(erroneous free)、没有释放的内存(unfreed memory)、溢出和下溢等等。

2·A floating-point underflow occurred at the RPC server.

RPC服务器上发生浮点下溢。

潜流

1·Paleaokarst might be classified, paternally as karst trace, karst cave, karst pore and cave, vertically as surface karst belt, seepage flow karst belt and underflow karst belt.

从形态上可将岩溶分为溶痕、溶穴、溶隙和洞穴，在垂向上可划分为地表岩溶带、渗流岩溶带和潜流岩溶带。

底流

1·During this time the read clock will abruptly speed-up or slow-down to avoid an overflow or underflow condition.

在这段时间里读时钟会突然加速或慢下来，以避免溢流或底流的情况。

2·The flow field analysis shows that the gas-liquid separating efficiency is not satisfied with the bad axial symmetry of the flow field and high gas content near the underflow outlet.

通过流场分析可以看出，流场对称性很差，底流出口附近气体含量较多，说明气液分离效果不好。