全部

1·The article for lubricating oil into dry gas seal reason is analyzed.

本文针对干气密封一次进油事故原因进行了分析。

2·Lubricating oil inside the engine produces a film on the moving parts.

发动机内部的机油在运动部件上形成一层膜。

3·Afterwards in meets in the fast box the replenishment 20 lubricating oil.

随后在接速箱内加注20号机械油。

4·Lubricating oil of the low pressure system supplies the main and other bearings.

低压系统的滑油供给主轴承和其它轴承。

5·Fuel oil and lubricating oil sy stems including pumps, purifiers, filters, heaters.

滑油管系，包括泵、分油机、滤器、加热器和管系状况满意，无泄漏。

6·Lubricating oil is designed to effectively carry away the excess heat being produced.

机油有效地带走发动机多余的热量。

7·As the lubricating oil passes over a hot engine part, it removes a certain amount of heat.

当机油经过发动机的热的部件时，它将带走一定量的热量。

8·The state of the fuel oil, lubricating oil, cooling fresh and sea water, and bilge system.

燃油、滑油、冷却水、海水和舱底水系统的情况。

9·Previously, this problem was avoided by using a large amount of lubricating oil during machining.

为解决这一问题，以往是使用大量切削油进行切削加工。

10·The testing process was used CD40 lubricating oil and CD40 lubricating oil appending nano-Cu additive.

试验结果证明纳米铜添加剂能够有效改善柴油机的磨合质量，缩短磨合时间。