全部

1·Soldering temperature scale on panel for easy control.

焊接温度刻度在面板上，方便控制。

2·The experiments show that soldering temperature play the most important role on wetting force.

试验结果表明，钎焊温度对润湿力作用显著。

3·The method to ensure proper soldering temperature and the principle for that is also dealt with.

指出了保证钎焊温度的方法及其原理等。

4·When soldering the electrolytic capacitor, the soldering time should never be permitted over 10 seconds, and for 260·C of the soldering temperature.

在焊接电解电容器时，其焊接时间和焊接温度不应超过10秒钟及260摄氏度。

5·The results show that the melting properties of the solder alloy are satisfactory, and the soldering temperature and time have much effect on the shearing-strength of the joints.

对多种锡铅焊料进行一系列不同条件下的漫流性试验 ，分析它们在铜表面上的铺展状况 ，最后归纳出焊料成分、钎焊温度、助焊剂对软钎焊料漫流性影响的规律。

6·Provides an optimum temperature for soldering PCB throughout reflowing operation.

通过回流焊操作为焊接pcb提供最佳温度。

7·Soldering materials can now be melted and maintained at a constant temperature with WAAGE's new melting pot.

WAAGE的新款坩埚罐，温度恒定，焊接材料可融合和维护。

8·Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. Wrot coper is exclusively used for fittings.

在高温环境下，铜也表现很好，而且易于通过焊接或钎焊进行连接。铜专门用作配件材料。

9·Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing.

锻造铜在高温应用中具有很好的性能，易于采用焊接或铜焊进行连接。

10·Soldering seal is one of the most important processes in the flywheel assembly procedure. Appropriate distribution of temperature field is needed to ensure the quality of the soldering.

密封焊接是飞轮装配的关键工序，为了保证密封焊接的质量，需要确定焊接过程中飞轮的温度场分布情况。