全部

1·Modified by removing sides of pins equally to produce width. Flats on each pin must be parallel to respective wrench arm.

可以通过拆卸插脚的两侧来改进，效果相当于改变宽度。每个插脚的平面必须平行于各自的扳手叉臂。

2·It consists of steering wheel steering shaft worm gear sector pitman arm drag link steering knuckle arm king pin steering arms tie rod front axle and steering knuckle.

转向系统包括转向盘、转向轴、蜗杆、扇形齿轮、转向摇臂、直拉杆、转向节臂、主销、转向臂、转向直拉杆、前轴和转向节。

3·Guide vane operation structure includes the guide vane arm clip board, guide vane arm, segmental keys, connection board, handle, cut pin, connecting rod pin and gland, etc.

导叶操作机构主要包括：导叶臂压板、导叶臂、分瓣键、连接板、耳柄、剪断销、连杆销及压盖等。

4·The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.

转向横拉杆长度的设置要保证转向横拉杆与转向节臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。

5·The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.

转向横拉杆长度的设置要保证转向横拉杆与梯形臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。

6·It consists of steering wheel steering shaft worm gear sector pitman arm drag link steering knuckle arm king pin steering arms tie rod front axle and steering knuckle.

转向系统包括转向盘，转向轴，蜗杆，扇形齿轮，转向摇臂，直拉杆，转向节臂，主销，转向臂，转向直拉杆，前轴和转向节。

7·To ensure a secure connection between the arm and the disc nut, split pin is used.

为了确保臂杆和阀瓣螺母之间的安全连接，使用了开口销。

8·The NC boring lathe equipped with this kind of deformable arm can bore special shaped pin hole for piston efficiently, and meanwhile meet the demand of micro meter accuracy.

装有这种新型变形镗杆的NC镗床能高效地镗削活塞异形销孔，并达到微米精度的要求。

9·The utility model is composed of a land wheel, a driving pin, a driving crank arm, a driving inserted link, a release spring, and a driving ratchet.

它由地轮、传动销、传动拐臂、传动插杆、回位弹簧和传动棘轮组成。

10·The third arm (17) is provided with an electrode pin (22) and a wiring (23) for detecting discharge current between the third arm (17) and the door (3).

在第三臂(17)上设有电极销(22)和配线(23)，以检测第三臂(17)与车门(3)之间的放电电流。