全部

1·The air feed is provided by a perforated tube that extends around the electrode.

该空气供给部分由在该电极周围延伸的一根穿孔管子构成。

2·Pressurized ventilator( air feed) and smoke extraction fan are interlockingly controlled.

加压送风机（补风）与排烟风机联锁控制。

3·And finally the influence of negative pressure of furnace hearth, the air feed pressure on internal gas f...

最后举例计算分析了炉膛负压、送风压力对燃烧器内部气动特性的影响。

4·And finally the influence of negative pressure of furnace hearth, the air feed pressure on internal gas flow fe...

最后举例计算分析了炉膛负压、送风压力对燃烧器内部气动特性的影响。

5·Radiation between cell tube and air feed tube and heat transfer by convection and conduction was also included in this model.

在传热模型中，除考虑传导和对流换热外，也考虑了电池和空气进气管之间的辐射换热。

6·Radiation between cell tube and air feed tube and heat transfer by convection and conduction were also included in this model.

在传热模型中，除了考虑传导和对流换热外，也考虑了电池和空气进气管之间的辐射换热。

7·The radiation between the cell tube and the air feed tube and heat transfer by convection and conduction are also included in this model.

在传热模型中，除了考虑传导和对流换热外，本文也考虑了电池和空气进气管之间的辐射换热。

8·The compressed air feed via distributor ring and profile seals only when the spindle completely stops. With rapid and clamping jaw stroke.

只有在主轴完全停止时，压缩空气才能通过配气盘和配气圈供给。

9·Mounting of the distributor ring on the headstock, the compressed air feed via distributor ring and end face seals only when the spindle stops.

配气盘固定于主轴箱上，只有在主轴停止时，压缩空气才能通过配气盘和配气圈供给。

10·And finally the influence of negative pressure of furnace hearth, the air feed pressure on internal gas flow feature of burner are analyzed b...

最后举例计算分析了炉膛负压、送风压力对燃烧器内部气动特性的影响。