全部

1·Plug-in solenoid with indicator light.

插件的指示灯螺线管。

2·Turn on the power switch, power indicator light.

打开电源开关，电源指示灯亮。

3·As long as the indicator light should be no problem.

只要指示灯亮了就应该没有问题的。

4·Be sure that you have a low battery indicator light.

肯定的是，您有一个低电池电量指示灯。

5·Indicator light on the toy lets you know it is powered up.

根据指标的玩具让你知道这是电。

6·Electricity, power generation, indicator light with loading conditions.

市电，发电，带载状态指示灯。

7·Indicator light provides quick visual reference of a tripped condition.

指示灯能够快速跳闸条件的视觉参考。

8·Open the power supply when the power indicator light is Always is normal.

打开电源的时候，电源指示灯是常亮的才是正常的。

9·Plug in the power, turn on power switch, power indicator light then the light;

插上电源，打开电源总开关，电源指示灯随即著亮；

10·Intuitive, easy to use controls with glowing red-green-yellow indicator light.

直观，易于使用发光的红，绿，黄色指示灯控制。

指示灯

1·The MultiAccount card has two buttons on its face, each with an indicator light that can be pressed to record data to its magnetic strip.

其中一种“多帐号”智能信用卡在其表面上有两个按钮，每个按钮拥有一个指示灯，你一按就能够将帐号数据记录到它的磁条上。

2·Up front, the glass runs edge to edge and there is an indicator light in the top right corner that alerts you to new emails and a assortment of other things.

正面是从边到边的玻璃；右上角有一个指示灯来提示有新邮件和其他东东。

3·Wait until the indicator light shows a full charge (on the ADR6300, for example, the charging LED changes from amber to green) but do not yet turn the device back on.

等到充电器指示灯显示完全充满后(在手机ADR6300上，充电器的LED充满后，灯的颜色会从琥珀色变成绿色)，这时候也不要打开手机。

4·Install incoming disconnect switch, incoming current meter, voltage meter (switchable) and incoming voltage indicator light.

安装进线刀开关、进线电流表、电压表(可切换)和进线电压指示灯。

5·The system will automatically display the filter board when it is saturated by the indicator light and the visual image on the control panel.

该系统会在过滤纸板饱和时通过指示灯以及控制面板上的可视化图像来自动显示。