全部

1·Will link directly into the screw plastic pin plug twist the hole, pin plug stress, and wall body firmly with inflation.

将螺钉连结工件直接拧入塑料销塞的孔内，销塞受力膨胀，与墙体牢固结合。

2·The structure and dimension of welding pin are the main factors which affects the flow direction of the plastic metal in FSW zone and the quality of the FSW seam.

焊接过程中搅拌焊针的结构形状是影响焊缝区塑性软化材料流动方式的主要因素，从而影响焊缝的成型质量。

3·The ejection mechanism used pin ejector to pull the plastic parts out with move slanting slide simultaneously leaving circular arc concave position.

脱模机构采用推杆推出塑件的同时带动斜滑块脱出圆弧形凹位，使脱模机构简单实用。

4·The part is available in a 24-pin, 0.3 inch wide, plastic and hermetic dual-in-line package (DIP) as well as a 24-lead small outline (SOIC) package.

该器件提供两种封装：24引脚、0.3英寸宽、塑料密封双列直插式封装(DIP)和24引脚小形集成封装(SOIC)。

5·You will receive an envelope with a plastic card and your PIN number enclosed in just a few days.

几天后你就会收到一个信封，内有一张塑料卡和个人密码。

6·Based on the analysis of plastic flow law in crankshaft forming, the cause of typical forming defects, i. e. the folding existing in the crankshaft pin and crank arm was found out.

通过模拟分析曲轴成形的塑性流动规律，找出了大型船用曲轴曲拐成形过程中的典型缺陷连杆颈和曲柄臂外侧折叠的成因。

7·With the increase of the translation velocity of the pin, the flow of the material in friction stir welding becomes faster but the equivalent plastic strain decreases.

随着搅拌头平移速度的增加，垂直于焊缝方向上的截面上，等效塑性应变减小，但是材料的流动速度会随之增加。

8·The utility model discloses a magic pin for changing hair styles, which is composed of a sleeve ring made of nylon or polyethylene plastic and a clip which are combined together.

本实用新型公开了一种发型变换魔钎，它由用尼龙或聚乙烯塑料制成的一套环和一别钎结合一体构成，形为一领带状。

9·When the socket is used, and a pin contacts a power, the copper sheet and the plastic insulating part of the pin enter the guard frame, which can effectively prevent the accident of electric shock.

使用该插座，当插销接触到电源时。插销的铜片和塑料绝缘部分已进入防护框内。能有效地防止触电事故。

10·Plastic enchase nut, Copper, iron and aluminum stainless steel jewelry car parts, Non-standard screws, Axle pin;

塑胶镶嵌螺母；铜铁铝不锈钢饰品车件；非标螺丝；车轴销钉；