全部

1·It is one of the important reasons that the research on the metal strip deformation mechanism of tension leveling is not sufficient and systematical enough yet.

究其原因，其中很重要的一条便是对于金属带材拉伸弯曲矫直的变形机理还缺乏深入系统的研究。

2·This paper expounds the characteristics of tension leveling and application in copper fabricating industry, and studies the selection and optimization for the main technological parameters.

本文论述了拉伸弯曲矫直技术的特点及其在铜加工领域的应用，同时探讨了相关工艺参数的选取和优化等问题。

3·The characterization of tensile-bend deformation was the core of tension leveling technology and the essence of tensile-bend deformation was cyclic repeated bend of steel strip with tension.

带钢拉伸弯曲变形过程的表征是拉伸弯曲矫直工艺研究中的关键，带钢拉伸弯曲变形过程在本质上就是带钢在张力作用下的反复弯曲变形过程。

4·And the nonionic and anionic silicone surfactants were used as wetting, emulsifying, leveling agent and defoamer for their ultra-low surface tension.

阴离子型有机硅表面活性剂具有超低的表面张力，广泛用作湿润剂、亲水剂、乳化剂，流平剂、消泡剂等。

5·When leveled by bend the strip is applied by a tension, under the influence of the tension and repeated leveling by bending strip is permanently elongation deformed, improving shape of strip.

而在弯曲矫直的同时，对带钢施加一定的张力，在张力和反复弯曲矫直的作用下，带钢产生永久的延伸变形，从而改善了带钢板形。

6·Using scaling tension test method simulated the effect of leveling elongations on yield strength ratio of hot dip galvanized dual phase steels.

研究了氮含量对热镀锌双相钢拉伸性能的影响，用定拉伸试验方法模拟了平整伸长率对热镀锌双相钢屈强比的影响。