全部

1·D: Plastics screw thread (as per sample).

D：塑料丝扣(见样品)。

2·The screw Thread of the cylinder connecting block stripped.

气缸连接挡块的螺纹滑牙了。

3·Their quantitative relation is set up in the same screw thread.

从而建立了同一普通螺纹中两者之间的定量关系式；

4·Lighting body connected by screw thread, sturdy and durable, easy installation.

灯体螺纹式连接，坚固耐用，安装方便。

5·The reasons for the shortage of screw thread after skew rolling were discussed.

另外，还对斜轧过程中容易出现牙型尺寸不足的原因进行了分析。

6·Components of screw thread with special specifications are also tailored available.

也可根据客户需要订制特殊规格的螺纹元件。

7·Screw thread gauge is the most extensive and practical detector in thread machining.

螺纹量规是螺纹加工中应用最广泛、最实用的检测工具。

8·The realizing of parametric design of screw thread of PDC bit makes CAE/CAM possible.

实现了PDC钻头螺纹部分的参数化设计，为进一步的CAE/CAM打下了坚实的基础。

9·A toothed rack was commonly adopted for the automatic screw thread rotational unloading.

自动旋转脱螺纹一般采用齿轮齿条机构或液压齿轮机构。

10·This paper analyzes the method of processing thread with the knife with single blade screw thread.

本文分析了用单刃螺纹刀来加工螺纹的方法。

螺纹

1·The sensor shall be mounted on object surface, by fixation of screw thread or flange, and ensure firm contact with the equipment surface.

传感器采用贴面形式安装在物体表面，固定形式为螺纹或法兰，并确保与设备表面接触严密。

2·It is about the ring screw thread smoke channel of the boiler shell type gas tube in the boiler field.

锅壳式烟管锅炉烟管内置水管的环形螺纹烟道，它涉及锅炉领域。

3·Their quantitative relation is set up in the same screw thread.

从而建立了同一普通螺纹中两者之间的定量关系式；

4·In normal use, non spiral crown should push the crown back to the original position, the crown screw thread to prevent water infiltration.

正常使用中，非螺旋式表冠应将表冠按回原始位置，螺纹表冠应旋紧以防止水渗入。

5·The dismantling screw provided by the manufacturer often fails because of screw thread damage in use.

制造厂家提供的拆卸螺杆在使用中经常发生螺纹损坏而导致失效。