全部

1·The paper studied the covered material thickness of the frozen sugarbeet storage.

本文对甜菜冻藏长期保管的苫盖厚度做一可行性研究。

2·After the evaluation period, the minimum material thickness measured is displayed.

在评价期间，最低材料厚度测量显示。

3·The material thickness is the key factor that influences the freeze-drying process.

物料厚度是影响冻干过程的关键因素；

4·Use generous radius at all corners. The inside corner radius should be a minimum of one material thickness.

在转角处大量采用圆角。圆角内部最小半径为一个壁厚。

5·This Paper Proposes a new approach calculating the material thickness function of air cushion belt conveyor.

对气垫带式输送机的物料厚度函数提出一种新的计算方法。

6·The sheet material thickness has important impacts on the rebound control and formulating parameters of thermal forming process.

板材厚度对回弹控制和热成形工艺参数的制定有重大影响。

7·If the day after due to the stiffness of the material required to change the material thickness, may lead to male into female die.

如果日后由于材料刚度的需要要求改变材料厚度，可能导致要将阳模转换为阴模。

8·The production material thickness will be used when calculating the die design dimensions-check with Project Manager for exact tolerances.

当谋划模具计划尺寸(由项目经理做精确公差的查抄)将利用材料的厚度。

9·Irrespective of the actualposition of the sheets, the material thickness is obtained by simple couplingof the distance signals from both sensors.

材料的厚度可以通过叠加两支传感器所测量到的位置值得来。

10·In This paper, the system composition and working principle of the material thickness measuring meter of ultrasonic sinter-circle-cooling machines are introduced.

介绍了超声波式烧结环冷机料层厚度测量仪的系统构成和工作原理。