全部

1·To clean; remove bottom plug, seat spring, strainer and seat disc.

因此要清洗，拆卸底部塞、阀座弹簧、过滤器和阀座阀瓣。

2·Mainly by the pilot valve seat, valve, diaphragm, spring, adjusting springs and other parts.

导阀主要由阀座、阀瓣、膜片、弹簧、调节弹簧等零件组成。

3·I mounted the two Spring Grip Clamps on to the seat backs of two chairs. In the clips I mounted Nikon Speedlight SB-80DX and directed them against the white wall.

我将2只大力夹夹在了2个椅子的后面，并且在夹子上安装了SB-80DX，直射背景墙。

4·In this case a proportional solenoid is used to push a poppet against a seat via a spring.

在此比例电磁铁被用来推动一个锥阀芯通过一个弹簧压缩阀座。

5·When the handwheel is rotated toward the open position the upper stem is moved away from the diaphragms allowing the spring to push the lower stem away from the seat.

当手轮象开启位置旋转时，上阀杆离开横膈膜，弹簧推动下阀杆离开阀座。

6·Note: the seats and springs of the first and second check modules are not interchangeable. The heavier spring and smaller diameter seat belong with the first check module.

注：第一和第二止回阀模块的阀座和弹簧是不可互换的。较重的弹簧和较小直径的阀座属于第一止回阀模块。

7·This means that the operating mechanism must be able to move sufficiently far enough away from the valve to allow the valves to be fully closed against its seat by the valve spring.

这意味着操作机构必须离阀门足够远以允许阀门通过气门弹簧使其完全关闭。

8·The parallel seat gate assembly consists of two interchangeable spring loaded discs, a fully guided disc carrier, and retaining pins.

平行阀座闸阀由两个可互换弹簧负载阀瓣，一个全导向阀瓣托架和扣环销钉构成。

9·Standard seat with the spring structure, the seat into the sphere of low pressure to ensure a good sealing performance.

标准阀座采用弹簧结构，将阀座推向球体，保证了良好的低压密封性能。

10·Clutch spring, valve spring, spring for shock absorber, torsion bar for automotive seat, other kinds of high quality spring and key parts for automotive industry.

离合器弹簧、气门弹簧、减震器弹簧、汽车座椅扭力杆、其他各类汽车行业用高品质弹簧及关键部件。