全部

1·The main parameters of the hydraulic support, such as working resistance, setting load and support height are analyzed.

对该类支架的工作阻力、初撑力、支护高度等主要参数进行了分析计算。

2·The main parameters of the hydraulic support, such as working resistance, setting load and support height, are analyzed and its main structures are design.

本文对该类支架的工作阻力、初撑力、支护高度等主要参数进行了分析计算，并对其主要结构进行了设计。

3·The study indicates that elastic modulus of the fallen rock in the goaf, the rigidity and setting load of support are the major factors that affect roof behaviour.

研究表明，采空区矸石弹性模数、支架刚度及初阻力是影响顶板动态的主要因素。

4·Under permissive load range, this scheme is conducting setting load spectrum experiment through adjustable input of the test bad, this makes the test time effectively decreased.

在允许的载荷输入范围内，该方案通过实验台加载力的可调输入，进行设定载荷谱试验，使试验时间有效缩短。

5·If the setting is at 20 and all 20 data source connections are fully utilized under load, then increase the setting to 30.

如果最大值的设置是20且所有20个数据源连接在负载下被完全利用，那么请把最大值的设置增加到30。

6·The Objective-C runtime will then try to load that window when your application runs, and will find your application delegate from the setting in that file.

在应用程序启动的时候，Objective-C运行时将会尝试去加载那个文件，并根据这个文件内的设置来查找应用程序委托类。

7·So it's either populating the controls, setting view state, applying themes, etc., everything happens on the page load.

因此，不是填充控件、设置viewstate、应用主题等一切都发生在页面加载上。

8·Run that with a high load setting and ensure that your server stays up until the load test finishes.

以一个高的负载设置运行那个工具以确信你的服务器能够承受直到测试结束。

9·Setting threshold to 200 causes image to load 200 pixels before it appears on viewport.

阈值设置为200年导致图像加载之前出现在视窗200像素。

10·You'll learn how to run remote tests with increased user loads, including setting up remote machines for distributed load generation.

您将学习如何使用IBM Rational Performance Tester通过增强的用户负载运行远程测试，包括如何为分布式的负载发生器设置远程机器。