全部

1·Flanging, smooth flow, the strength of the weld.

外翻边，水流通畅，焊届强度大。

2·Can also be used for sheet metal bending, flanging process.

也可用于金属板件的弯曲、翻边等工艺。

3·PVC is joined by solvent cementing, threading, or flanging.

PVC采用溶剂粘结、螺纹或法兰连接方式。

4·The deep drawing, trimming and flanging is the most basic three processes.

而拉深、切边和翻边是最基本的三道工序。

5·The flanging deformation mechanism and its springback reason was theoretically analyzed.

从理论上分析了翻边的变形机理及翻边回弹的原因。

6·Widely used in automotive components which require flanging deformation, such as swing arm, wheels, etc.

广泛用于要求翻边变形的汽车零部件，如摆臂、车轮等。

7·It is established as intelligential design system of automobile flanging die on base of 2d environmental.

建立了基于二维环境的汽车翻边模智能化设计系统。

8·The influence of average normal anisotropic coefficient on the flanging height can be considered in this model.

该模型考虑厚向(平均)各向异性系数对翻边高度的影响。

9·Meanwhile, as a part needs high precision as flanging for example, flanging die with hyperbatic structure is described.

同时，以一翻边精度要求较高的零件为例，介绍了一种倒装式结构的翻边模。

10·The free end of the connecting plate (40) is arranged wit a flanging (50) which is perpendicular to the connecting plate.

连接板(40)的自由端设有垂直于该连接板的折边(50)。

翻边

1·In addition, according to experimental results, slab method in plastic mechanics and material hardening theory, a new formula for hole flanging force is concluded.

另外，根据试验结果，并利用塑性力学中的主应力法和材料硬化理论，推导了一个计算圆孔翻边力的新公式。

2·With the total strain theory and membrane assumption and taking the normal anisotropy of sheet metal into consideration, initial blank size can be directly calculated from desired flanging height.

在该算法中，采用了全量塑性理论及膜应变假定，并考虑了板材的厚向各向异性，可以直接从所需的翻边高度计算出初始坯料的尺寸。

3·The system uses associated design idea in order to realize input of flanging die model parameter and harmonious unification of structure redesign.

采用关联设计思想，实现翻边模模型参数的输入与结构再设计的和谐统一。

4·The characteristics of the corner rain eaves parts and their forming principle were analyzed. The compound forming was broken into simple bending and flanging.

分析了角部雨檐零件特点及其成形机理，将复合成形分解为简单的弯曲和翻边。

5·Widely used in automotive components which require flanging deformation, such as swing arm, wheels, etc.

广泛用于要求翻边变形的汽车零部件，如摆臂、车轮等。

折边

1·The free end of the connecting plate (40) is arranged wit a flanging (50) which is perpendicular to the connecting plate.

连接板(40)的自由端设有垂直于该连接板的折边(50)。

2·Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

第三个过程：纸张经后推气挡板之作用，再往复至第二层滚筒完成前边折边。

(1)hole flanging孔翻边；孔凸缘加工

(1)flanging machine[机]折边机