全部

1·Distribution characteristic of magnetic field in cold crucible for induction melting;

冷坩埚感应熔炼技术提高了钛铝基合金的熔体质量。

2·The composite material can be prepared through induction melting and copper mold casting methods.

该复合材料可通过感应熔炼和铜模浇铸的方法制备。

3·With capasity of 1mt / hour and and so a coreless copper induction melting furnace with 600 kg / hour capacity.

生产能力为1公吨/小时而且无核铜熔炼窑有600公斤/小时的生产能力。

4·In this paper a series of RE2MgNi9 hydrogen storage alloys were synthesized by vacuum induction melting method.

用真空熔炼法制备了多种贮氢合金原样，分别经不同温度、时间热处理和保护气氛下球磨处理。

5·The paper recommends the appearance of the water cooled bushing corroded for mains frenquency induction melting furnace.

介绍熔化炉的水冷套发生腐蚀的现象，分析了发生腐蚀的原因，提出了水冷套在制作、安装等方面的改进措施。

6·The principle and characteristics of some typical methods of induction melting and electromagnetic shaping were discussed.

评述了几种感应熔炼电磁约束成形技术的原理和特点，并对其存在问题及发展趋势进行了讨论。

7·Alloy coating is prepared by induction melting and casting with the method of direct feeding powder on the surface of a shaft.

介绍了用直接送粉方式在轴类零件表面感应熔铸合金层的工艺原理和实验装置。

8·In this paper, the structure and operational effects of the induction melting furnace used for continuously producing quartz glass tubes are introduced.

介绍了用于连续拉制石英玻璃管材的感应熔化炉的整体结构和使用效果。

9·Experimental results show that Quality magnetic alloy 1jha1 can be produced by air induction melting (AIM) and vacuum pouring technologically and economically.

结果显示，采用非真空感应熔炼(AIM方法)加真空浇注生产1 J HA1合金具有工艺上和经济上的可行性。

10·A prediction model of molten steel temperature based on RBF neural network was developed to reduce cost and improve temperature control accuracy for vacuum induction melting.

针对真空感应炉生产过程中温度测量成本较高及精度较差等不足，建立了基于RBF神经网络的真空感应炉终点钢水温度预报模型。