全部

1·The temperature in generatrix layer is higher than in the worm wheel layer.

母线层的温度较高，而蜗壳层的温度较低。

2·A worm and worm wheel gives a large speed ratio but with significant sliding.

蜗杆可获得很大的降速比，但是存在严峻的相对滑动。

3·Worm and worm wheel mechanism is used to transfer between two crisscross axis of sports and power.

蜗轮蜗杆机构常用来传递两交错轴之间的运动和动力。

4·To design the mechanical and auto-control system, the worm wheel is used to drive the outer annular magnet.

在机械及控制系统设计中，由于磁体需套装在单晶炉上，因此采用了蜗轮蜗杆机械驱动外磁环转动的机械结构。

5·The worm wheel is formed by means of two components for better receiving the worm wheel on the lever spring.

为了更好地将蜗轮接收在杠杆 弹簧上，该蜗轮两件式地构成。

6·Slag collector: wet slag discharge is made by hydraulic ratchet wheel, detent, worm wheel or worm from both sides.

清灰机构：采用液压驱动棘轮、棘爪装置或蜗轮蜗杆装置湿式双侧除灰。

7·Finally, a practical example of worm wheel re ducer is introduced to demonstrate the effectiveness of the proposed method.

最后，以蜗轮减速器装拆序列规划为实例验证该方法的有效性。

8·Lathe C616 is innovated with economical nc system. Its function is expanded after the innovation, it can machine worm wheel.

用经济型数控系统对C616车床进行了改造，改造后的C616车床扩展了功能，可完成蜗轮的数控加工。

9·Formulas are given in many mechanical manuals to calculate the tooth thickness at only the reference circle of worm and worm wheel.

蜗轮蜗杆的分度圆齿厚在大部分机械手册中都给出了计算公式，但在其它任意半径处的齿厚计算很少有资料涉及。

10·Mainly use worm wheel, six worm axes drive, steel seat, high compression resistance, fetch up the former product pressure is not enough.

主要采用蜗轮、蜗杆式六轴传动的方式，全钢机座，耐压力强，弥补了旧产品压力不足的缺点。

蜗轮

1·The mill comprises roll changing hydrocylinder (1), with rolling mill group (3), roll changer (2), post (4), worm wheel lifting gear (5), U-shaped frame (7), rotation ear (8) and bolt (9).

其特征在于本轧机包括换辊液 压缸（1）、换辊小车（2）、轧钢机辊组（3）、立柱（4）、蜗轮升降机构（5）、U型 架（7）、转动转耳（8）、连接螺栓（9）；