全部

1·Objective To design an air inlet valve for signal soldier ligebuoy.

目的设计一种单兵救生气囊充气阀。

2·The one-way air inlet valve (5) adopts a valve core type one-way air inlet valve or other one-way air inlet valves.

所说的单向进气阀（5）采用气门芯式单向进气阀或者其它单向 进气阀。

3·Air inlet throttle valve with pneumatic actuator and positioner.

空气进气节流调节阀：带有气动定位和执行机构。

4·The air inlet and the air outlet of each section are provided with a regulating valve to adjust the air volume.

在每节的进风口与出风口处都设有调节阀，调节风量的大小。

5·Pressing-off inlet valve is one of the methods of air-regulating for reciprocating compressor, and it possesses economic , safe and well-fixing character.

顶开进气阀进行气量调节是活塞式压缩机气量调节方法中的一种，它具有经济、可靠、结构简单及安装方便等特点。

6·The carburetor by-pass air inlet controlled by an on-off solenoid valve is used as an actuator.

研制了用电磁阀控制的化油器旁通空气装置作为执行机构。

7·As the shut-off valve is seated, a passage 41 in its stem connects with ports 42 in the guide bushing 37 so as to allow inlet air to pass though the valve stem to a housing port 44.

在关闭阀是坐在座位上，一个通过41个在其干连接与港口42轴套在指南37，使空气入口，虽然通过的阀干，一个住房端口44。

8·Traditional bin pump using the double gate valve as inlet valve. After material filled with large volume vessel, this system using a strong air flow to blow the material into silo.

传统的仓式泵一般采用双闸阀作为进料阀，在输送过程中采用“集中一次输送”，即使用大容积的发送罐，然后通过较大的气耗量将物料吹至接受仓。

9·The air inlet of the inflator can be tightly plugged in the valve inside the branch pipe port to open the valve.

充气器的进气口可插紧在支管口内的阀门中，开启阀门。

10·Air regulating for reciprocating compressor with pressing off inlet valve was analysed particularly and the late research on such a system was introduced.

详细分析了活塞式压缩机顶开吸气阀排气量调节技术，并对新近研究工作做了介绍。