全部

1·It is also suitable for carbon arc gouging using up to 10mm diameter carbon electrodes.

它也适用于直径达10毫米的碳棒进行碳弧气刨。

2·This paper briefly introduces the work principle and structure of carbon arc air gouging.

介绍了碳弧气刨的工作原理和组成结构。

3·EMEM may replace emery wheel grinding, carbon arc gouging operation in certain applications.

数控电熔爆机床可在某些加工场合取代金刚石砂轮磨削、碳弧气刨加工。

4·All carbon arc gouged surface areas shall be ground to clean bright metal prior to subsequent welding.

开始后续焊接前，所有碳弧气刨面区域应接地至洁净明亮的金属。

5·It was found that impact toughness of weld metal was maximum using carbon arc air gouging, and it was minimum using acid backing.

结果表明，清根方式对焊缝冲击韧度有明显影响，用碳弧气刨清根得到的焊缝冲击韧度最好，而用酸性衬垫得到的焊缝冲击韧度最差。

6·Windmills from old car parts and car batteries and artificial sunlight from carbon arc lamps using pencil leads is possible, however.

可以从破旧的车辆里拆取风叶和蓄电池，再用铅笔芯制造弧光照明灯获取人工照明是有可能的。

7·2 projecting heads for table cinematographs, 1 optical sound head, 1 carbon arc projection lamp, 1 slide projector and more. All untested.

2个放映机头，用于桌式电影摄影机，1个电子光声头，1台煤油弧光灯，1个滑线电阻，1台幻灯机，1个印片机箱，1个暗房照明灯(煤油)，均未检测。

8·Companies with welding, carbon dioxide gas shielded arc welding, argon, carbon arc gouging, oxygen cutting and other special operations personnel.

公司具备电焊、二氧化碳气体保护焊、氩弧焊、碳弧气刨、氧气切割等特种作业人员。

9·The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc …

研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。

10·The accumulated solar UV data, solar UV-spectrum in Guangzhou area, and UV-spectrum of artificial lamp as sunshine carbon arc, UV carbon arc, xenon arc etc were analyzed.

系统分析了太阳近紫外能量累积值与紫外能谱实测结果及实测阳光碳弧、紫外碳弧、氙灯等人工光源紫外能谱分布图；