全部

1·Handle, Hand Wheel, Pull Handle.

手柄，手轮，拉手。

2·Test auto pilot each watch by hand wheel operation.

每班一次用手操舵检查自动舵。

3·B lifting, the rope not tied hand wheel or valve stem.

b起吊时，绳子不要系在手轮或阀杆上。

4·Test auto pilot once each watch by hand wheel operation.

每班一次用手动舵检查自动舵。

5·Select hand wheel or a hinged presser food to sew the stuff.

选用轮钱或平押脚，来车缝纫物品。

6·Beneath the hand wheel are two nuts attached to the valve body.

在手轮下面是两个附在阀体上的螺母。

7·Valve on activated (hand wheel) pneumatic devices to be completed.

阀门启闭靠启动(手轮)气动装置来完成。

8·The movement and operation mode of hand wheel of CNC lathe were researched.

针对数控车床的手轮移动操作方式进行研究。

9·Solenoid valve, hand wheel, valve position switch, air filter regulator and so on.

电磁阀、手轮机构、阀位开关、空气过滤减压器等。

10·Bilateral height can be adjusted, easy to use, easy and simple hand wheel adjustments.

双边高度可以调整，使用方便，手轮调整轻松简单。

手轮

1·Spin the transition hand wheel (No. 2 in Fig. 1), make the system be located at the high power passageway.

旋转转换手轮(图1序号2)，使系统处于高倍通道位置。

2·The hand wheel is always in the same position relative to the valve body regardless of whether the valve is in the open or closed position.

不管阀门是在开启或是关闭位置，手轮总是处在相对于阀体的同样的位置。

3·The movement and operation mode of hand wheel of CNC lathe were researched.

针对数控车床的手轮移动操作方式进行研究。

4·B lifting, the rope not tied hand wheel or valve stem.

b起吊时，绳子不要系在手轮或阀杆上。

5·It is more ease and high accuracy based on adjustment hand wheel during filling. The filling capacity can be adjustable.

采用灌装量调节手轮，使用更加方便，灌装量精确。灌装速度可随意调节。