全部

1·Radial stress, axis stress and shear stress at the critical interface regions are obtained and compared.

对各情况下的轴向、径向和剪切应力做了比较分析。

2·The Dikes surrounding dike Mountain parallel a radial stress pattern that existed at the time the dikes were intruded.

岩脉山周围的岩脉与岩脉侵入时就已存在的放射状应力图像是相应的。

3·The distribution of radial stress is the same as that of oil film pressure, which means compressive stress at the pressure region.

径向应力的分布与油膜压力的分布相同，压应力存在于油膜压力区域。

4·The results show that the radial deformation is the function of axial position and radial stress is the function of radial position.

结果表明：缸体的径向变形是轴向位置的函数，半径方向的应力是径向位置的函数。

5·The fishing rod bracket has the advantages of simple structure, low manufacturing cost, and strong capacity of radial stress resistance.

本实用新型具有结构简单、生产成本低、抗径向压力能力强的特点。

6·The radial stress is press stress in the joint axis and is gradually from press stress chang into pull stress in the area further away from the axis.

接头内径向残余应力在轴心处为压应力，随着远离轴心逐渐由拉应力变为压应力，在接头边缘区域为拉应力。

7·The influence of seepage effect on radial stress around circular opening is more significant in poor quality rock mass than in good quality rock mass.

在围岩质量较差时，渗流效应对圆形洞室径向应力的影响比围岩质量较好时的影响大。

8·In this paper charged perfect fluid sphere with no radial stress is discussed. A new solution is presented and the property of the solution is also discussed.

本文讨论了径向胁强为零的球对称的荷电理想流体的情况。

9·The drawing process for producing the part is completed in one operation, and a hole for machining use is pre-punched to control the magnitude of radial stress.

采用一次拉延成型，并在其底部预冲工艺孔，可控制径向应力的大小。

10·The shearing-stress formula in curved beams can be derived by solving directly an integral equation, and the formula for radial stresses is also presented in this paper.

直接对曲梁剪应力的积分方程求解，导出了曲梁剪应力和径向应力的计算公式。