全部

1·Cable is applied to gasket seal.

电缆采用添料密封。

2·In order for the flange joint to maintain a gasket seal.

为使法兰连接保持良好的垫片固定密封。

3·A rubber gasket seal is used between a clamp nut of a barrel screw bolt and the outer wall of the barrel body of the utility model.

筒体螺栓的紧固螺母和筒体外壁之间也采用橡胶垫圈密封。

4·Teflon - lined pipe, casing, elbow, the three exchanges or four, size head, cylinder, air compressor - oxygen - ring, gasket seal ring and auto parts.

聚四氟乙烯内衬直管， 套管，弯头，三通，四通，大小头，筒体，空压机-制氧机- 活塞环、密封圈和汽配封圈。

5·Carburetor gasket seal, small general gasoline engine sealing, air filter separator device sealing, sealing, crankcase sealing, cylinder head gaskets, insulation gasket, exhaust pipe sealing.

小型通用汽油机用垫片，化油器密封，隔板器密封，空气滤清器密封，曲轴箱密封，汽缸头垫片，隔热罩垫片，排气管密封。

6·Generally, the cylinder and the cylinder head bolt together with a thin gasket pressed between them to ensure a good seal.

一般来说，气缸和气缸盖用螺栓紧固在一起，气缸与气缸盖之间用一薄垫圈确保密封良好。

7·When installing a pinch valve to a rubber, PVC, or any slick mating flange, we recommend that you install a metal serrated gasket between the two flanges to assist in the seal.

在安装夹管阀时，如果采用橡胶、PVC或任何“光滑的”配套法兰，则我们建议在两个法兰之间加装一个金属锯齿垫圈以增强密封效果。

8·Seal gaskets are closed in the support points of plates resist high press fluid impact and prevent leak out of fluids. Twice gelatinize technology make gasket firm connected.

处于板片有力支撑点包围中的密封垫片，能承受较大的流体冲击，不会泄漏，两次涂胶工艺保证了密封垫片牢固粘接。

9·This would include in-line instrumentation, flow meters, regulating valves ultraviolet lights, pumps, pump seals, filter membranes, gasket and seal materials, and other specialized in-line devices.

该项包括在线仪器、流量计、调节阀、紫外光、泵、泵的密封件、过滤膜、垫圈和密封材料以及其他特殊的在线设备。

10·The recommended sealing torque to ensure proper seal of this connection is 25 foot-pounds for the glass-filled Teflon gasket and 15 foot-pounds for the Teflon gasket.

为了确保接头的彻底密封，推荐的密封转矩对于玻璃填充特氟纶垫圈是25英尺-磅，对于特氟纶垫圈是15英尺-磅。