全部

1·The fracture strength of circular diamond film was measured by a burst pressure technique.

利用压力爆破技术测量了圆形金刚石膜的断裂强度。

2·Vessel burst pressure is the mean between maximum event (explosion) pressure and the yield stress of the vessel.

容器爆破压力是容器屈服应力和最大事件(爆炸)压力之间的平均数。

3·Experiment was carried out on the short-time burst pressure of 20 different specifications of PSP at normal temperature.

开展复合管短期爆破压力试验研究，得到20种型号复合管短期爆破压力试验结果。

4·Low burst pressure of silicone tubing without reinforcement compared to the other thermoplastic tubing is another limitation.

低硅爆破压力不加强管比其他热塑性塑料管是另一个限制。

5·Calculated burst pressure and theoretical burst pressure are compared to confirm the modified burst pressure formula for tube.

比较数值计算的爆破压力和理论爆破压力，确定简单圆管模型的爆破压力修正公式。

6·The main research results are as follows:(1)Based on strength equivalent method, short-time burst pressure formula of PSP was deduced.

采用力平衡法推导出了这种复合管的短期爆破压力计算公式。

7·Formation burst pressure is one of the key parameters for the thermal production of heavy oil, drilling engineering and downhole operation.

地层破裂压力是钻井工程、井下作业及稠油油藏热力开采的重要参数。

8·The result is a hose and fitting combination that performs to rated burst pressure and assured of 100% performance of the complete hose assembly.

其结果是软管和接头的组合，执行到额定爆破压力和100%的完整的软管总成的性能保证。

9·The calculation methods for the burst pressure of gas bottle, thicknesses of the steel cylinder and the fiber reinforced composite cylinder are given.

给出了气瓶爆破压强以及钢筒和纤筒壁厚的计算方法。

10·In order to make the calculated burst pressure coincide with actual value, the developed fiber strength value must be determined by the simulation test.

为了使计算的爆破压强与实际结果相符合，纤维发挥强度的选取必须由模拟试验确定。