全部

1·The harmfulness caused by corrosion of metal anode in electro-coating process was expounded. Corrosion reasons of anode were analysed and its protection methods were explored.

阐述了在阴极电泳涂装过程中金属阳极因腐蚀产生的危害，分析探讨了阳极的腐蚀原因及其防护方法。

2·This article focuses on the difficulties and solutions about using cathode electro-coating in the production of large coach, and the problems to be taken care of in the production.

阴极电泳涂装工艺在轿车和小型车生产上被广泛使用，但目前国内在大型客车生产上采用可为绝无仅有。

3·This paper introduces the entirely closed upstream cleaning technology after electro - coating, where reverse osmosis technology is employed and domestic ultrafiltration equipment is used.

介绍了采用反渗透技术，结合国内现有油漆线的超滤装置实现电泳后冲洗全封闭逆流冲洗的技术。

4·Electro deposition coating engineering is a kind of complicate process. Among all the surface treatment processes of aluminum alloys, abnormalities are occurred easily in this process.

电着涂装工程是一项复杂的制程，在所有铝合金表面处理方式中，是最容易产生异常情况的制程。

5·By research with electro-probe microanalyzer(EPMA), we found that the surface density and the interface combination status of the coating is the key factors that effect its anti-oxidation.

利用电子探针及透射电镜研究发现，涂层的表面致密化程度和界面结合情况是影响其抗氧化性的关键因素。

6·The crystalline temperature and the hardness of the amorphous electro-depositional coating were determined.

对非晶合金电沉积镀层的晶化温度和硬度进行了测定。

7·Surfactant, mechanical and ultrasonic technique are applied together to diverse nano-particle among composite electro-brush plating coating.

本文选用表面活性剂、恒温磁力搅拌和超声波相结合的方式，对复合镀液进行分散。

8·The influence of thermal cycles on the enamel coating corrosion resistance was investigated by Weld Thermal Simulation, Electro chemical Technique, SEM and XRD.

采用焊接热模拟、电化学测试、扫描电镜、X射线衍射等方法研究了热循环对喷瓷管道瓷层耐蚀性的影响。

9·The experimental results show that corrosion resistance and combinative ability of the Ni-P alloy electro-brush plating coating are excellent.

结果表明，镍磷合金镀层具有优良的耐蚀性和良好的结合力。

10·A protecting aluminum coating on the magnesium alloy surface was obtained by electro-arc spraying.

本文叙述了表面技术——电弧热喷涂技术在材料防腐上的应用。