全部

1·This is the cross slide feed screw and two homemade setscrew collars.

这是两岸幻灯片feedscrew和两个自制固定螺丝的衣领。

2·The weighing meter consists of a variable frequency feed screw and a weighing sensor;

所述称重计量器 由变频螺旋送料机和称重传感器构成；

3·Introduced the scope, technical parameters and equipment standards of cold feed screw extruder and a horizontal cutting machine.

介绍了冷喂料橡胶螺杆挤出机和卧式裁断机的使用范围、技术参数、设备完好标准等。

4·The optical base and the feed screw or the guide shaft are held in contact with sliding members made of a resin or a ceramic and having a heat conductivity.

光学基座和进给丝杠或引导轴通过具有导热性的树脂制或者陶瓷制的滑动构件接触。

5·The band drawing mechanism is composed of a band clamping slide block and a band drawing feed screw connected with a loose pin at one end of the slide block.

抽带机构由一个夹带滑块和与滑块一端活销接的抽带丝杠组成。

6·Ball screw using ball movement, so the starting torque is very small, does not appear sliding movement crawling phenomenon, so can ensure accurate micro feed.

滚珠丝杠利用的是滚珠运动，因此启动力矩极小，不会出现滑动运动那样的爬行现象，故而能保证实现精确的微进给。

7·Ball screw due to high movement efficiency, small heat, it can achieve high-speed feed (motion).

滚珠丝杠由于运动效率高、发热小，故可实现高速进给(运动)。

8·As previously mentioned, the axial feed is automatically generated when cutting a thread by means of the lead screw, which drives the carriage.

如前所述，当依靠驱动大拖板的丝杆切削螺纹时轴向进给是自动产生的。

9·This paper studies the influence of extrusion temperature. Screw speed, feed speed and water content on starch gelatinization depolymerization, soluble index and expansion efficiency.

研究了挤压过程中，挤压温度、螺杆转速、进料速度、原料水分含量对淀粉的糊化、降解及对挤出物的溶解指数和膨化度的影响。

10·It includes vertical feed, horizontal feed mechanism design, and servo motor, ball screw options, and other tasks.

它主要包括纵向进给机构，横向进给机构的设计，及伺服电机，滚珠丝杠的选择等任务。