全部

1·Low hydrogen type electrode is baked out before welding, the baking temperature and duration as specified by the manufacturer.

低氢焊条在焊前应烘干，烘干温度和时间遵照厂家说明。

2·The effects of baking temperature, holding time and binder on secondary luminescence properties of phosphor were systematically explored.

研究了烧结温度、保温时间以及粘结剂对荧光粉二次性能的影响。

3·The results show that baking temperature has great effect on mass content of calcium while acid dissolving process has little impact on it.

目的研究聚合氯化铝钙中铝形态、钙含量与反应条件的关系，并确定聚合氯化铝钙的分子通式。

4·This paper focuses its investigations on such respects as fabric pretreatment, pigments, adhesives, antimigrants, baking temperature and running speed, etc.

文中着重对织物前处理、涂料、 粘合剂、抗泳移剂、焙烘温度和车速等进行了探讨。

5·With the raising of baking temperature, the intensity of luminescence was reduced, this may be caused by the changing concentration quenching of the luminescence.

随着焙烧温度的升高，发射强度减弱，这可能是由于猝灭引起的。

6·The present paper discusses the effect of baking temperature, baking time and pre-strain on the bake hardenability of ultra low carbon bake hardening steel (ULC-BH steel).

研究分析烘烤温度、烘烤时间、预应变量等烘烤条件对超低碳烘烤硬化钢烘烤硬化性能的影响。

7·The reporter visits partial college discovery, this kind abreacts from what download on the network game is being heated up in undergraduate medium baking temperature spread.

记者走访部分高校发现，这类从网络上下载的发泄游戏正在大学生中火热蔓延开来。

8·Simultaneously, defects in the passivation layer of the device surface are also increased with the increasing of the baking temperature and also the surface recombination velocity.

同时芯片表面钝化层内的缺陷数目也在温度作用下增加，引起芯片表面复合速度增加。

9·At the same time, we studied the influences of the preparation condition, baking temperature, baking time, adding amount of magnetic materials, consistency of impregnating solution on it.

同时，我们还考察了合成条件、焙烧温度、焙烧时间、磁性基质加入量、浸渍液浓度对磁性固体超强酸催化剂性质的影响。

10·The effects of baking temperature, baking time and prestrain on the bake hardenability and dent resistance of isotropic sheet steel and BH sheet steel produced by batch annealing were studied.

研究了烘烤温度、烘烤时间和预拉伸应变量对罩式炉退火工艺生产的各向同性钢的烘烤硬化性的影响，并与力学性能相当的冷轧烘烤硬化钢进行了对比。