全部

1·Engine oil level Reduce oil level!

发动机油液位过高！

2·Check the gear oil level.

注意齿轮油油位。

3·The required oil level in the tank has to be checked.

必须检查油箱中的油位是否符合要求。

4·If equipped with an oil level sensor, disconnect the sensor.

如果配备有油面感知器，断开感知器。

5·Start measuring the oil level by pressing the operating lever .

通过按压操纵杆可开始测量机油油位。

6·Inspect bearing lubrication if the oil level is in normal level.

检查轴承是否有油，滑动轴承应检查是否达到规定油位。

7·This same switch will also operate on low oil level, such as a slow oil leak.

其他低油位情况发生，比如慢漏油时，浮控开关也会有动作。

8·Check the oil level and top up with the required amount of oil (see above).

检查油位和补足所需的石油量(见上文)。

9·Check the oil level on the dipstick, making sure the level is in the proper range.

查看量油机，确保油压在一个合理的范围。

10·The inspection glass for oil level of main generator engine governor, to be renewed.

主发电机调速器用于检查油等级的检查玻璃需要换新。