全部

1·The results show that RE-Al alloying can improve the hardness, the strength and the oxide film density of the piercing plug.

研究结果表明，稀土铝合金化可提高材料的硬度、强度及氧化膜的致密度。

2·To revise the effects from fatigue extent of automatic developing solution on the film density by way of measuring density change of the brain ct films.

通过观测CT照片密度变化，缩小自动冲洗套药疲劳度对CT照片密度的影响。

3·This article discusses the test methods of dry film density, solvent content, and weight loss during baking of the cathodic electrophoresis paints, as well as the influencing factors.

对阴极电泳漆的干膜密度、溶剂含量、烘干减量的测试方法、影响因素进行了探讨。

4·Current density: unit under the plating area under current, usually the higher current density film thickness is thicker, but is high coating will scorched thick dry.

电流密度：单位电镀面积下所承受的电流，通常电流密度越高膜厚越厚，但是过高时镀层会烧焦粗燥。

5·However, the pixel density of the film can be straightforwardly reduced by fabricating smaller array spacing and a smaller antenna size, as well as using a more tightly focusing lens for recording.

但是，薄膜的像素密度会由于通造更小的阵列间距和更小的晶须尺寸以及使用更精密的聚焦透镜等直接降低。

6·Density is a logarithmic unit that describes the ratio between light hitting the film and light being transmitted through the film.

密度是一个对数单位，介绍了光线击中通过电影传播电影和光线之间的比例。

7·A survey to make high density multilayer thick film surface mount assembly and measures adopted for mount design and manufacturing technology for them are introduced.

介绍了研制大面积高密度多层厚膜表面组装件的概况及组装设计与制造工艺上所采取的措施。

8·Objective: To test and analyze density of medical dry film varying with temperature.

目的：测试与分析医用干式胶片密度随温度的变化。

9·For fabrication, a thin film process of high density routing and multi-chip assembly is adopted to meet the performance and structure requirements.

在制作上，根据性能和结构要求，采用了高密度布线、多芯片组装的薄膜工艺。

10·The effect of ion bombardment on film packing density and moisture adsorption is examined.

研究了离子轰击对薄膜聚集密度和潮气吸附的影响。