全部

1·The component of electrode coating has certain effects on the usability of stainless steel electrode.

焊条药皮成分对不锈钢焊条工艺性能有较大的影响。

2·The film formed on the stainless steel electrode under the potentiodynamic polarization with increasing sweep potential.

随着极化电位向阳极区移动，不锈钢电极发生阳极氧化，形成了氧化铀沉积膜。

3·Effects of peak electric voltage and feed flow rates of methane and hydrogen on CH4 conversion, C2 yield, and the selectivity were investigated using copper or stainless steel electrode.

实验采用铜电极和不锈钢电极分别考察了输入电场峰值电压和甲烷、氢气进料流量等参数对甲烷转化率和碳二烃收率、选择性的影响。

4·DCEP (Direct Current Electrode Positive) is used for most stainless-steel welding.

直流反接用于大多数不锈钢的焊接。

5·The mechanism of welding crack generation in the copper - stainless steel tube electrode stem of Vacuum Consumable Arc Furnace has been analyzed.

分析了真空白耗电弧炉铜-不锈钢异种金属套管式电极杆焊接裂纹产生的机理。

6·The corrosion behavior of electrode of stainless steel with polyaniline coating in corrosive acid media were investigated.

研究了由聚苯胺修饰的不锈钢电极在酸性介质中的腐蚀行为。

7·Stainless steel textile web is pressed outside as electrode.

用外贴不锈钢纤维网为电极。

8·The welding experiment and procedure qualification for manual TIG welding of stainless steel tubes with flux cored electrode is presented in this paper.

介绍采用药芯焊丝手工钨极氩弧焊焊接奥氏体不锈钢管道所进行的焊接试验及工艺评定。

9·With austenitic welding material, solid wire, flux-cored wire and electrode, welded joint mechanical property of TCS ferritic stainless steel all can meet usability.

T CS铁素体不锈钢采用奥氏体型焊材，实芯焊丝、药芯焊丝和电焊条方法，焊接接头力学性能可以满足使用要求。

10·We measure the wear ratio while machining the stainless steel use the tungsten electrode. From the experiment, the precision of the groove is good via applying the compensation method…

实验测定了钨电极加工不锈钢的损耗率，应用适时补偿方法加工得到的单层单道窄槽的尺寸精度良好。