全部

1·Experimental study on the error correction of spiral bevel gear.

螺旋锥齿轮误差修正试验研究。

2·Paint the tooth flank of the big bevel gear with a thin and equal red lead coat.

即在大锥齿轮的齿面上涂一层薄而均匀的红铅油，然后转动齿轮数圈。

3·The drive advantages and technologic advantages of plastic bevel gear were analyzed.

分析了塑料斜齿轮的传动优点和工艺特点。

4·When ordering bevel gear actuators, specify mounting position as second line information.

如果是订购锥齿轮执行器，请在第二行增加安装位置信息。

5·It was very difficult that the three-dimensional modeling to involute-column-bevel gear before.

对于渐开线圆柱斜齿轮的三维建模在以前来说是相当困难的。

6·The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。

7·The theoretical analysis research of spiral bevel gear lapping with dynamic force is carried out.

该研究是国内首次对螺旋锥齿轮动态力研齿进行的理论分析研究。

8·All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.

所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。

9·The quenching distortion of rear axle spiral bevel gear used in FLAT tractor is studied in this paper.

研究了菲亚特拖拉机后桥大圆锥螺旋齿轮淬火变形规律，分析了原淬火压模存在的问题。

10·When gears are to be used to transmit motion between intersecting shaft, some of bevel gear is required.

当齿轮是用来传递运动之间的交叉轴，其中有些圆锥齿轮的需要。

锥齿轮

1·Paint the tooth flank of the big bevel gear with a thin and equal red lead coat.

即在大锥齿轮的齿面上涂一层薄而均匀的红铅油，然后转动齿轮数圈。

2·All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.

所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。

3·Loosening the screw using a commercially available electric screwdriver can cause the shaft bevel gear and threaded disc to move inwards out of the splines rendering the screw ineffective.

用商用电动螺丝刀松开螺钉可能导致轴锥齿轮和螺纹盘向内移出花键，致使螺钉失效。

4·The theoretical analysis research of spiral bevel gear lapping with dynamic force is carried out.

该研究是国内首次对螺旋锥齿轮动态力研齿进行的理论分析研究。

5·By applying SPC technology, the experimental study on processing performance of homemade YK2050 CNC spiral bevel gear grinding machine was done.

应用统计过程控制技术，对国产七轴五联动数控螺旋锥齿轮磨齿机yk2050的加工性能进行实验研究。

伞齿轮

1·Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1.

如果采用正齿轮(SGA)或复合伞齿轮(BGA)附件，则可以在图1中显示的各个位置安装手轮。

2·See Actuators &Accessories section for: Bevel gear, spur gear, chain wheel, motor or cylinder actuators; Bypasses, drains or auxiliary piping; Special packing, etc.

参阅执行机构和附件章节，了解：伞齿轮，正齿轮，链轮，马达或缸体执行机构；旁路，排泄，或辅助管路；特殊填料，等等。

3·Bilayer gears, crown gears, bevel gear, wheel, Helical, Worm, safety clutch teeth, small modulus gear and steering gear copper server.

双层齿轮、皇冠齿轮、伞齿轮、滚轮、斜齿、蜗杆、安全离合齿、小模数铜齿及舵机伺服器等。

4·The technological process of the new and old die forging for the differential bevel gear was described.

叙述了差动伞齿轮新旧模锻工艺过程。