全部

1·Remove blind flange (24) to inspect.

拆卸法兰盖(24)进行检查。

2·All internal parts accessible by removing blind flange or spring chamber.

通过拆卸法兰盖或弹簧腔室，可以接近所有内部部件。

3·Lug style valves shall be capable of providing bidirectional Dead End Service at full pressure without the need for down stream blind flange.

凸耳式阀门应该有能力在全压力下提供双向“终端应用”，不需要下游蒸汽无口法兰。

4·With the different conditions, reasonably selecting the material, length, diameter and taper of ahead or back blind flange can realize the broadband optimization.

在不同的条件下，通过选择合理的前后盖板材料、长度、直径、锥度，可使换能器的频带宽度得到优化。

5·Describes a sleeve type compensator-the self balancing compensator, which can be used in heating networks to eliminate the blind flange force on primary fixing trestles.

介绍了一种套筒型补偿器———自平衡补偿器，它可用在热力管网中消除主固定支架的盲板力。

6·The other flange of the piping is kept free and is set to the tray's flange with a temporary blind.

管道另一端法兰不连接作，用于连接临时盲板制成的法兰盖。

7·Before loading and unloading the molecular sieve, the blind plate must be installed on the flange of the central pipe.

在装、卸分子筛之前，都必须在中心管上法兰处加装盲板。

8·Use one 3.2 diameter blind rivet through each flange at each support.

在每个支座处，使用一个直径为3.2 的暗铆钉与龙骨每个翼缘固定。