全部

1·Worn teeth on ring gear or drive pinion gear.

环形齿轮或驱动小齿轮上齿磨损。

2·Worn teeth on ring gear or drive pinion gear.

根据齿轮啮合原理，建立了轮齿的精确齿形。

3·The pinion gear is attached to the steering shaft.

该齿轮连接转向轴。

4·Most main gears are brass with a steel pinion gear.

齿轮极其重要——可能是要考虑的最重要的部件了。

5·Note the small setscrew on the pinion gear... they strip easily.

注意在小齿轮的小型固定螺丝…他们很容易剥离。

6·Push and hold ring gear upward while not allowing the pinion gear to rotate.

当不准许主动齿轮旋转时，向上推环齿轮，并放牢它。

7·Rotate the pinion gear several complete revolutions to align the bearing rollers.

转动主动齿轮若干圈以校正轴承滚柱。

8·Double bearing Clutch Bell Pinion Pinion gear is now dual ball bearing supported.

前翼齿轮现在是双滚珠轴承承托的。

9·The only remaining step was to remove the pinion gear from the old motor and add it to the new one.

唯一剩下的步骤是从旧电机拆下小齿轮和将其添加到新的。

10·A second cable assembly includes a second pinion gear mounted for rotational movement in the housing.

第二线缆组件包括：第二小齿轮，其被安装来在所述外壳内做旋转运动；