全部

1·The difference of sedimentation speed, shrinkage degree and direction is the main factor of lawn hollow and hole.

因土壤土质因素出现的土壤沉降速率、收缩程度和方向的不同是导致草坪凹陷、坑洼的主要原因。

2·Short-hole shrinkage method without sill pillar occupies 60%.

无底柱浅孔留矿采矿法60%。

3·The paper introduced shallow hole shrinkage stoping method that has been used in Baoziwan Gold Mine for many years.

叙述了堡子湾金矿多年来应用浅孔留矿采矿法的生产实践以及对采切工程的改进。

4·The test of single compact weight decrease proved that when the shrinkage ratio of the compacting die is increased to over 1.22, there is no more crack initiated in the compact inner hole.

并用压坯单重递减法试验证实，当将压模收缩比增加到1 2 2以上时，可以保证压坯内孔不出现裂纹。

5·In the drilling process, should be kept clean hole soil, encountered hole collapse, shrinkage and other abnormal situations, timely solution.

在钻进过程中，应随时清理孔口积土，遇到塌孔、缩孔等异常情况，应及时研究解决。

6·According to the technical mining condition in Hua Changgou Gold Mine, the short hole shrinkage mining was chosen.

根据铧厂沟金矿矿体的开采技术条件，选用了浅孔留矿采矿法回采。

7·The paper discusses the new options of short-hole shrinkage: all-over mining, static shrinkage, precipice shrinkage, rock mining conditions, active supporting and ore pillar recovery.

本文探讨了浅孔留矿祛新型变形方案：留矿全面法、静态留矿法、削壁留矿法，以及这些方法的矿岩开采条件，采场主动支护，矿柱回收等。

8·Synopsis: This paper introduces the position and characteristics of the blow hole shrinkage in the side riser of cast steel castings and probes into the formation mechanism and its prevention.

本文介绍了铸钢件边冒口气缩扎的产生部位及特征，并对其形成机理及防止措施进行了探讨。

9·The reasons resulting in the shrinkage porosity, gas-hole and impacted sand in bronze castings were analyzed.

分析了锡青铜叶轮铸件出现的缩孔、 气孔、冲砂等缺陷的原因。

10·Based on the existing conditions, Pindu Municipal Gold Mine preferred short-hole shrinkage stoping without sill, intermediate and crown pillar to other mining methods and obtained excellent result.

平度市金矿利用现有的条件，因地制宜采用“三无”即无底、间、顶矿柱浅扎留矿法，收到了好效果。