全部

1·Not every years old and still, still can make the male die.

壮心未与年俱老，死去犹能作鬼雄。

2·The female die was designed movable but the male die was fixed.

该模具将凹模设计成活动式，凸模固定。

3·Figure 1 shows the male die of a hot extrusion planar combined die.

图1所示为一热冲压平面结合模具的公模简图。

4·Blanking gap is the difference size between the male die and female die's work part.

冲裁间隙是指冲裁凸模和凹模之间工作部分的尺寸之差。

5·MethodsUse male die-female die transition method to make individual resin nasal structure which also has with direction.

方法：使用阴模、阳模转换的方法制作出个性化，并具有方向性的树脂鼻模具。

6·The shape of the male die cutting edge was determined by experiment. The products punched had minimal burr and smooth section.

通过试验确定了合理的凸模刃口形状，冲出的零件毛刺极小，产品断面平整光滑。

7·If the day after due to the stiffness of the material required to change the material thickness, may lead to male into female die.

如果日后由于材料刚度的需要要求改变材料厚度，可能导致要将阳模转换为阴模。

8·According to the blanking distortion procedure, the theory that decide the proper gap is to make sure the edge of the male die and female die's gap can be superposition.

由冲裁变形过程的分析可知，决定合理间隙值的理论依据是应保证在塑性剪切变形结束后，由凸模和凹模刃口处所产生的上、下剪切裂纹重合。

9·The utility model has the advantages of that the male die can be replaced if the male die is damaged, the original cutter rest can still work and unnecessary waste is reduced.

本实用新型具有以下效果：当凸模损坏时，可单独更换凸模，原刀架仍可使用，减少了不必要浪费。

10·Men compete more with each other than females do, because of the male strategy to live hard, die young 'which means they may invest less in immunity.

男性彼此之间的竞争比女性之间的竞争要激烈得多，因为男性“今朝有酒今朝醉，明日愁来明日愁”的生存策略意味着他们在免疫力上投入较少。