全部

1·Once the insulation is impacted and changed by several factors, the polarization process and return voltage that reflects the dielectric response characteristics will be changed also.

当绝缘状态受到各种因素的影响而发生变化时，其极化现象会发生变化，因而反映电介质响应特性的回复电压也会随之改变。

2·When references experience a temperature change and return to the initial temperature, they do not always have the same initial output voltage.

当基准经历一个温度变化且返回初始温度，它们并非总能获得与初始电压相同的电压。

3·The voltage will return to normal by the second time voltage data is displayed on the screen.

当第二次电压出现在屏幕上时，电压会回复正常水平。

4·SPWM is a set of constant amplitude but unconstant width rectangular serial pulse produced by control return circuit to approximate sinusoidal voltage waves.

(正弦脉宽调制)是由控制回路产生一组等幅而不等宽的矩形脉冲列，用来近似正弦电压波。

5·In an insulating material, nearly all the electrons will return to their normal position instantly the high voltage is removed.

在绝缘材料中，高压一消除，几乎所有的电子都返会原来正常的位置。

6·When you sample an analog port it will return a value between 0 and 1023, proportional on the voltage (05 volts) on the signal pin (pin 3).

当你对一个模拟端口采样时，它会返回一个与信号针脚（脚3）上的电压成比例的，范围在0至1023之间的值。

7·The system can automatically determine the sample breakdown and collect the breakdown voltage data and leakage current, and can quickly reduce the automatic return to zero at the same time.

系统能够自动判别试样击穿并采集击穿电压数据及泄露电流，同时能够在击穿的瞬间电压迅速降低自动归零。

8·The return circuit of the infusion is a high voltage of the closed circuit, which does not disturb the external factor, and is not affected by walking, running, and various vehicles traveling.

输液回路内为闭路高压，不受外界因素的干扰，行走、奔跑或随各种交通工具行进都不影响其正常工作。

9·To compensate for the waveform's dc-offset voltage, an amplifier buffers the 2.6V internal analog-ground reference and drives an output pin that serves as the LVDT's analog-ground return.

为补偿波形直流偏置电压，放大器对2.6V内部模拟地基准进行缓冲，并驱动用作LVDT模拟地回路的输出管脚。