全部

1·The cross connection point of the round steel should weld fastness.

圆钢的交叉连接触应焊接牢固。

2·Because of this cross connection, the DTR output line can be used for simple flow control.

因为这种交叉连接，DTR输出线可以被用来简单的流量控制。

3·It is used in routing switch wavelength choice optical cross connection natural repair protection and so on.

光开关可实现在全光层的路由选择、波长选择、光交叉连接以及自愈保护等功能。

4·We introduce a general model for the calculation of the optical signal to noise ratio (SNR) of the optical cross connection (OXC) in optical networks in this paper.

文章给出了计算OXC级联信噪比的一般解析模型，并针对“信号功率均衡”和“总功率均衡”两种方案进行了研究，分析了在这两种特定情况下系统的信噪比特性。

5·For consistency reasons, it is thus very desirable to mandate the connection paths by setting up the target connection requirements to prevent cross connection as described below.

出于一致性的原因，非常需要按照如下所示建立防止交叉连接模式的目标连接需求，从而形成强制的连接路径。

6·Optical switch is chiefly used in OXC (optical Cross Connection) system in optical network. It can fulfill many functions such as routing, selecting optical wavelength and OXC etc.

它主要用于光网络的光交叉(OXC)节点系统中，用来实现全光层次的路由选择、波长选择、光交叉连接等功能。

7·An inspection of the plant revealed that a cross connection in the pipes carrying the milk allowed mingling of raw milk with pasteurized milk when certain valves were incorrectly closed.

一项关于工厂的检验报告在输送牛奶管道的十字联结处，当某些阀门被不正确关闭时，使生牛奶和杀菌消毒过的牛奶混合。

8·Through precise timing analyzing and calculation, this system chose high-speed CPLD to implement the cross connection between the chips, achieved the harmonious operation of the different parts.

通过时序分析和计算，选用高速CPLD完成芯片间互联，实现了系统各部分的协调工作。

9·As a key device for the realization of WDM-based all-optical network, OXC (optical cross connection) device is plagued with severe crosstalk problem caused by the interaction of its signal and link.

光交叉连接器件(OXC)是实现WDM全光网络的关键器件，但由于其自身的链路和信号相互作用，会产生严重的串扰问题，从而限制了OXC性能的充分发挥。

10·With a null modem connection, the transmit and receive lines are cross-linked.

使用零调制解调器连接时，发送线和接收线要交叉连接。