全部

1·The recovery technique of cobalt in waste diamond cutter is introduced.

介绍利用废金刚石中的钴生产七水硫酸钴的方法。

2·The new diamond cutter for fracturing rock consists of pregnant layers containing diamond and pure metal matrix layers alternately.

新型金刚石碎岩刀头，由含有金刚石的孕镶层和纯胎体层相间组成。

3·It is a new technical innovation which the basic movement principles of the cone bit combine with the super wear-resistant diamond cutter.

它是将牙轮钻头切削齿交替工作的基本运动原理与金刚石钻头的超强耐磨切削齿技术相结合的一项技术创新。

4·A study on the trends of silver white chip formation when cutting the silicon-aluminium alloy parts with a polymerized crystal diamond cutter is carried out.

对于采用聚晶金刚石刀具加工硅铝合金时产生积屑瘤的一些规律进行了研究。

5·The technologies include the ruling methods, the adjusting of the cutting angle, the selecting for the knife tip angle of the diamond cutter and the choosing of the materials being ruled.

详细介绍了指纹采集仪用光栅在研制过程中，对原有光栅刻划机分度系统结构改造和重新设计，以及新的刻划工艺，它包括刻划方法、切削角度的调整、金刚石刀具刀尖夹角的确定和被刻划材料的选择。

6·The additional bevel on the diamond face of the cutter enables compression to spread across more area, leading to a lower stress gradient across the cutting edge.

在金刚石面额外的坡口设计使得压力分散在更大面积上，这样加到切削齿上的应力也就更低。

7·The results in this paper will provide a reliable theoretical guidance to the design of the diamond end milling cutter.

分析结果可以为高速切削金刚石立铣刀的设计提供可靠的理论依据。

8·Grinding milling cutter manufacturing diamond grinding wheel configuration Taiwan division, grinding cutters Angle diaphragm, long service life a precise 2.5 million pieces.

铣刀修磨机配置台湾师制造钻石砂轮膜片，修磨铣刀角度精确，使用寿命长答2.5万支。

9·After photo one I polish each hook by diamond milling cutter.

照片1是我用金刚石锉刀磨光后的每一个挂钩。

10·The study shows that in granite cutting processes, PDC cutter is worn by micro chipping in diamond grains due to mechanical action, and the wear surface is almost parallel to the rock surface.

研究结果表明：切削花岗岩时，受切削力及其冲击的作用，PDC刀具产生近乎平行岩石表面的磨损形式，磨损机理为机械作用引起聚晶金刚石层微观裂纹产生并扩展而导致的金刚石颗粒的微观破碎。