全部

1·Disconnect retractor wire harness connector.

断开皮带卷收器线束接头。

2·Unplug the power mirror wire harness connector.

拔去电动视镜线束接头。

3·It was a faulty wire harness. We will fix it for free.

是一个线束有问题，我们会免费修好。

4·Install wire harness for electrically adjustable seats.

安装电动可调座椅的线束。

5·Release the repaired wire harness with the CAAC certificate.

对维修后的电缆发放CAAC证书。

6·Unplug the wire harness connectors from the multi - function switch.

从多功能开关上拔出线束接头。

7·Install the blower motor wire harness into the wire harness retainer.

将吹风机线束装入线束夹扣中。

8·It was just hanging there next to the main wire harness guard bracket.

这只是挂有旁边的后卫主要线束支架。

9·Pull off front wire harness and loosen front ground strap cross member.

拔下前线束并松开前接地端横梁。

10·Non-halogen resin composition, insulated electrical wire, and wire harness.

无卤素树脂组合物，绝缘电线，和线束。

线束

1·Slide the memory seat module off of the two mounting bracket slide tabs far enough to access and unplug the wire harness connectors.

将存储座位模组滑离两个安装支架滑式舌片，直至足以够着并拔下线束接头。

2·Disconnect plug connection for bonnet wire harness in plenum panel on right.

断开右侧充压板中发动机罩线束的插头。

3·Unplug the wire harness connectors from the multi - function switch.

从多功能开关上拔出线束接头。

4·It was just hanging there next to the main wire harness guard bracket.

这只是挂有旁边的后卫主要线束支架。

5·Pull off front wire harness and loosen front ground strap cross member.

拔下前线束并松开前接地端横梁。