全部

1·ZHOU S, YAN Y X. Structure and mechanical properties of DLC films by pulsed vacuum arc ion deposition[J]. Vacuum, 2005,42(2):15-18.

[12] 周顺，严一心。脉冲真空电弧离子镀在不锈钢上沉积类金刚石薄膜的研究[J]。真空，2005，42（2）：15-18。

2·Power in ion deposition arc evaporating unit, type ZXG is specially used for the arc evaporation of multi-arc ion coating equipment.

ZX G型离子沉积电弧蒸发电源装置，专门用于多弧离子镀膜机的电弧蒸发。

3·PVD coatings involve atom-by-atom, molecule-by-molecule, or ion deposition of various materials on solid substrates in vacuum systems.

物理蒸发沉淀涂层涉及到在真空装置内各种各样的材料原子紧靠原子、分子紧靠分子或离子沉淀于固态基体上。

4·The system include pulse cathodic arc ion deposition, direct current cathodic arc ion deposition, magnetic sputtering and electronic beam evaporation technologies.

该系统集脉冲阴极弧离子镀、直流阴极弧离子镀、磁控溅射和电子束蒸发等镀膜工艺以及气体和金属离子注入于一体。

5·Ion energy is an important parameter influencing the quality of films by pulsed vacuum arc ion deposition, so it is very necessary to measure the ion energy of pulsed arc.

离子能量是影响脉冲真空电弧离子镀镀膜质量的一个重要参数，因而测量真空电弧中离子的能量非常重要。

6·The results show that the dynamic hybrid ion implantation deposition technology has remarkable results for improving the performance of combination between film and silicon substrate.

对比分析结果表明，动态混合离子注入沉积工艺对提高膜层与基体的结合性能效果显著。

7·Coating by physical vapour deposition (PVD), coating by chemical vapour deposition (CVD) and surface layer modification by ion implantation, all three are being tested and are partly in use.

涂层的化学气相沉积(CVD)和表面层改性的物理气相沉积(PVD)涂层的离子注入，所有三个正在受到考验，并部分使用。

8·Various metal or metal the material composing a target is collide with by electrified ion is brought about the metal atom becoming the free particle deposition surface in mylar above.

各种金属或金属合成靶材被带电离子撞击，造成金属原子成为自由粒子沉积在上面的聚酯薄膜的表面。

9·DOE's fabrication techniques mainly include laser beam or electron beam writing, RIE, ion milling and thin film deposition.

衍射光学元件的制作技术主要包括激光或电子束直写、反应离子刻蚀、离子束铣及薄膜沉积。

10·There are various methods to obtain antibacterial surface on stainless steels, such as chemical heat treatment, magnetron sputtering, ion implantation, Sol-Gel, and chemical deposition.

制备表面抗菌不锈钢的方法有化学热处理、磁控溅射、离子注入、溶胶-凝胶和化学沉积。