全部

1·A method to use the function of EXCEL layout evaluation to calculate statically indeterminate structure problem was introduced in this paper.

本文介绍了如何应用电子表格软件EXCEL的“规划求解”功能解算超静定结构问题的方法。

2·Geometric composition analysis is focal point in structural mechanics and often used in finding the solution of statically indeterminate structure.

几何组成分析在结构力学中是重点，常应用于求解超静定结构，文章用几何组成对力法、位移法和力矩分配法进行了分析。

3·It is helpful to understand more deeply the contents associated with the statically indeterminate structure, and know better the application of the unit load method.

这有助于更深地理解超静定结构相关内容，也可以进一步了解单位荷载法的应用。

4·Finite beam segment method is an effective way to solve the shear lag problem of statically indeterminate structure, such as continuous girder with constant cross section etc.

有限梁段法是求解超静定结构(如连续梁等)剪力滞行之有效的方法。

5·If matched pairs of tapered roller bearings arranged face-to-face or back-to-back are mounted together with a third bearing, the bearing arrangement is statically indeterminate.

如果面对面或背对背配置的相配圆锥滚子轴承对与第三个轴承安装在一起，轴承配置为静态不确定。

6·The internal force redistribution in statically indeterminate structures will be created by axial deformation difference, and the stress performance of structure would be changed.

超静定结构中的这种轴向变形差会引起结构的内力重分布，对结构的受力性能将产生一定的影响。

7·Though it is derived from the method of forces, it is also suitable for the slope and deflections method and that of moment distribution for solving statically indeterminate structure.

这个方法虽然是由力法推导出来的，但也适用于用位移法、力矩分配法等求解超静定结构时的情况。

8·Kilns are the key equipment in the production of metallurgy, cement and material of fire-fast. It is the statically indeterminate system with heavy load, large torque and multi-support.

回转窑是冶金、水泥、耐火材料连续生产中的关键设备，是一种重载、大扭矩、多支点、超静定运行系统。

9·The general formula which could be applied to compute the constraint reaction to statically indeterminate structures with elastic bearings is obtained by analysis of a computing result.

通过对含有弹性支承的结构约束反力计算结果分析，得出含弹性支承约束反力的统一计算公式。

10·The large deflections and stiffness changes usually associated with plastic bending can significantly change the internal load distribution, particularly in statically indeterminate beams.

随着塑性弯曲而发生的挠度和刚度大的变化常会使结构内部发生显著地内力重分布，特别是超静定梁中。