全部

1·The isothermal quenching process of the ductile iron camshaft was analyzed.

对球铁凸轮轴的等温淬火工艺进行了分析。

2·The mechanical properties of nodular cast iron can be further improved by isothermal quenching.

处理可进一步提高球墨铸铁的机械性能。

3·However, the precipitation temperature of all phases can determine by isothermal quenching method.

等温淬火法可以确定所有相的析出温度。

4·Especially is suitable for the thin stalloy workpiece and class of pinchcock isothermal quenching.

尤其适用于薄钢片工件、弹簧夹类等温淬火。

5·The influences of isothermal quenching temperature on the retained austenite and mechanical properties of ADI were studied.

研究了等温淬火温度对ADI中残余奥氏体及其力学性能的影响。

6·The ferrite is obtained first through annealing, then biphase structure of ferrite and bainite is obtained through isothermal quenching.

其经预先退火得到全部铁素体组织，然后等温淬火得到铁素体和贝氏体双相组织的基体。

7·Because the temperature of retained austenite is more and more stable after the isothermal quenching, it should be carried out four times.

由于等温淬火后的残余奥氏体温度较多而且稳定，故应进行四次回火。

8·The effect of silicon and isothermal quenching process on the microstructure and mechanical property of the high-carbon low alloy martensite-Bainite steel was studied.

研究了硅和等温淬火工艺对高碳低合金马氏体-贝氏体钢金相组织与机械性能的影响。

9·There is a large landing has a grinder, a large vertical lathe, CNC lathe, bainite isothermal quenching heat treatment production line and other advanced production equipment.

拥有有大型落地磨床、大型立式车床、数控车床、贝氏体等温淬火热处理生产线等先进生产设备。

10·The mechanical properties, structures, cutability and wear-resistance of full-bainite ductile iron obtained by using three kinds of isothermal quenching processes were investigated.

研究了由三种热处理工艺获得的全贝氏体等温淬火球铁的机械性能、组织状态及切削加工性能和耐磨性能。