全部

1·Its very important to control the electrode current of arc furnace.

在冶炼工业的电弧炉中有效地控制电极电流，对于电弧炉正常运行至关重要。

2·Analysis on influence of ground electrode current in HVDC on AC power network.

直流输电系统接地极电流对交流电网的影响分析。

3·The result shows that it's a very effectual control method and can get the stable electrode current.

结果表明该方法可以获得有效的控制效果，使电极电流 达到稳定状态。

4·In this paper, the electrode structure and single electrode current exciting mode are deeply analyzed and optimized by the fundamental study of ERT technology.

本论文从ERT技术的原理性研究出发，针对该技术中电极结构设计进行了分析与优化，并对单电极电流激励模式做了深入的研究和优化。

5·Through a combination of upper and lower engines, the electrode current in the smelting process is controlled to achieve the purpose of controlling the temperature of smelting furnace.

对铅锌矿冶炼厂生产作业进行自动化技术改造，通过上位机与下位机的有机结合，对精矿冶炼过程中的电极电流进行控制，实现熔炉温度控制，解决了传统手法可测不可控的难题。

6·Electroslag remelting's consumable electrode current is determined by the distance between electrode and slag bath which is determined by the rotate speed of motors driven by electrode.

电渣重熔的自耗电极电流大小取决于电极与渣池的距离，而该距离大小又取决于电极驱动电机的转速。

7·The method of intelligent control based on neural network is applied in electrode current of arc furnace. The electrode current is analyzed and simulated by the BP and RBF models of neural network.

讨论了基于神经网络对电弧炉电极进行智能控制的方法，运用神经网络的BP、RBF以及双隐层BP模型，分别对电弧炉电极的单相电流及三相电流进行了分析和仿真。

8·The new material has such high energy density because it can operate at a higher voltage than current electrode materials and also store more lithium ions.

这种新材料具有高能量密度，因为它能够以比目前更高的电压的电极材料储存更多的锂离子个单一的百分比数字。

9·This forces the freed electrons to travel to the second electrode through a wire, creating an electric current.

而自由电子则通过一条导线移动至第二电极，从而产生电流。

10·First the current distribution on the electrode polarization: do not exist on the electrode surface, the current distribution.

初次电流分布：在电极极化不存在时，电流在电极表面上的分布。