全部

1·Use sharp tools on rubber sleeve.

在橡胶套管上采用尖锐的工具。

2·Remove rubber sleeve from rear spoiler and unwind the adhesive tape.

拆下后扰流板的橡胶套并松开胶带。

3·The cork cover is on the lifting rod and is tightly matched with the rubber sleeve.

提升杆与锥形塞通过丝扣连接，塞盖套在提升杆上并与橡胶套紧密配合；

4·Die-cutting roller cylinder type auto separation unit can increase wear of rubber sleeve.

模切辊采用汽缸自动分离装置，减少胶垫磨损。

5·Retighten all flange bolts in a star pattern in order to extrude rubber sleeve flange material.

为了将橡胶套管法兰挤出来，需要按照星形模式重新紧固所有法兰螺栓。

6·The utility model is suitable for the torsion rod rubber sleeve of the trailer of the automobile.

本实用新型适用于汽车挂车的扭力杆胶套。

7·The insulating sleeve with the elasticity adopts a silicone tube, a rubber sleeve or a plastic sleeve.

所述的带有弹性的绝缘套管采用硅胶套管、橡胶套管或塑料套管。

8·On compressive shrinkage machine, the quality of rubber sleeve will directly impair the shrinkage effect.

在机械预缩整理机中，橡胶毯的优劣直接影响预缩整理效果。

9·The FXF type non-rotating stabilizer (rubber sleeve stabilizer )is a special tool in drilling to avoid blade wear and wall damage.

FXF非旋转稳定器（橡胶套稳定器）是钻井作业中为保护井壁不受刮削而制作的专用工具。

10·Note: You may increase the torque on the rubber sleeve up to two times the specified value without causing sleeve or flange damage.

注意：在橡胶套管上增加的扭矩可以达到规定扭矩值的两倍，在此时仍然不会对套管或法兰造成损害。