全部

1·Imported copper wire clamp, made of Brass H62 by die casting.

铜螺栓接线夹，采用H62黄铜压铸制造。

2·Strain guy wire clamp has two types which are wedge type and compression joint.

耐张类拉线线夹型式优锲式铝合压接两种形式。

3·Applicable to all types of wire clamp and fixed ribbon weaving, or armored cable, for the need for cables and the core wire part of the flameproof enclosure up to IP66 sealing gas place.

适用于夹持和固定各种类型的钢丝编织或带状铠装电缆，用于必须对电缆芯线部分隔爆及外壳气体密封达ip66的场所。

4·Because the wire clamp is arranged in the shell body of the cable connector, the overall appearance is beautiful and smooth, the connection is firm, and the wire clamp can not easily fall off.

该线夹位于电缆连接器壳体的内部，整体美观、外型流畅、连接牢固、线夹不容易脱落。

5·The advantages, construction technology and its test and application conditions for a kind of new wire connector, H type line clamp, were introduced.

分析了传统线夹发热的原因，介绍了一种新型线夹—H型线夹的优点、施工工艺及其试验和应用情况。

6·Clamp 4 is 4-wire signal output; as long as signal connection is correct, it may be connected to other clamp directly to measure battery.

夹具4是四线法信号的输出，只要信号连接正确，则可以直接与其它夹具连接对电池进行测试。

7·Clean posts and clamp with wire brush.

用钢丝刷清刷接线柱和夹子。

8·JBL, JBT, JB-TL Specific forms parallel groove clamp is suitable for unendure force splicing and branch on the aerial wire , being used with insulation cover . It's action is insulation protection.

TL系列异型并沟线夹适用于架空电力线路中导线的非承受力接续与分支，与绝缘罩配套使用起防护绝缘作用。

9·An infinite wire carrying standard high current perpendicular to the geometric center of the clamp ammeter should be the ideal method for the clamp ammeters calibration.

钳形电流表理想的校准方法是用标准电流源对一根无限长导线加测试电流，并使该导线垂直穿过被校钳形表的几何中心。

10·Vertical installation, can be laid in fine wire rope hung, and with a metal clamp is fixed on the frame or other pipeline.

垂直安装时，可敷设在细钢绳上吊挂，并用金属夹具固定在钢架或其它管线上。