全部

1·PWB samples were subjected to the solder float test per MIL-P-55110 and then the PTHs were cross-sectioned.

印制板试样必须经过MIL—P—55110标准浮焊试验，然后对金属化孔进行剖视。

2·Inside test tubes in his lab float microscopic, hollow spheres of fat-primitive membrane bubbles.

斯佐斯塔克实验室的试管中漂浮着微观的脂肪中空球，即原始的膜泡。

3·For most values of a this works fine, but in general it is dangerous to test float equality.

对大多数值来说，这个循环都挺管用的，但一般来说用浮点数来测试等式是很危险的。

4·Test for freshness by checking if the egg sinks in a bowl or glass of water. Fresh eggs will stayat the bottom, but stale eggs float to the top.

将鸡蛋浸入一碗水中可以检查其新鲜度。新鲜的鸡蛋会沉在碗底，而变质的鸡蛋会浮在表面。

5·Changing the return type to float, for example, isn't flagged as an error because an int in the test method's return statement is automatically promoted to float.

如果将返回值改为float，这不会被标记成错误，因为test方法返回语句中的int会自动转换成float。

6·The memory and intelligence of mice were examined with the conditional avoidance test, float harbor test and white paper test.

采用条件回避试验、漂浮避难试验和白纸试验等方法测定小鼠空间记忆和智能。

7·The position of the float on the riser should be fixed through calculation and site test and adjusted when necessary.

浮漂在升降管上的位置确定，应先通过计算，然后在现场试验，不断调整。

8·Supported by the 211 project, the untouched test system for float body is designed in our experimental room.

依托“211工程”国家重点学科建设经费。 我们自主开发了非接触式浮体六自由度测试系统。

9·As there is no unified standards of failure for the soil float resisting anchor rod test, the parameters of pulling-resistance are discrete, which often led to incorrect design.

因抗浮锚杆试验没有统一的破坏标准，测出的抗拔参数差异大，不能正确指导设计。

10·In order to understand float resisting mechanism and its characteristic a test on the bored cast-in-place pile with enlarged bottom and up-lift resistance pile with equal section is carried out.

为了了解扩底抗拔桩的抗拔机理和抗浮特点，进行扩底抗拔桩和等截面抗拔桩的试桩试验。